Copper alloys are widely used in the lead frame, high-speed railway and other applications
due to their high electrical conductivity and adequate mechanical properties. In this work, the …

The present review article evaluates the research and progress status of Cu–Ni–Sn-based
spinodal alloys focussed on the methods and technologies implemented to enhance the …

We report that a single crystal Ni2Si nanowire (NW) of intermetallic compound can be
reliably designed using simple three-step processes: casting a ternary Cu-Ni-Si alloy …

Abstract A commercial Cu-Ni-Si-Cr alloy used as a model material was annealed and then
peak-aged. The detailed microstructure and property analyses were performed to determine …

Abstract Ti additions in Cu–Cr–Zr alloys are useful for achieving high mechanical properties.
In this work, the influence of Ti contents (0.25 wt%, 0.6 wt%, and 1.02 wt%) on the …

Thermal-mechanical treatment is critical for the synthesis of Cu-Ni-Si alloys with high
strength and conductivity. In this work, a high-temperature/short-time pre-aging treatment …

The effect of aging treatment on the microstructure of Cu–Cr–Ti alloy was studied by
Scanning electron microscope (SEM) and Transmission electron microscope (TEM), and its …

Two types of alloys, Cu-Ni-Co-Si and Cu-Cr-Zr, are considered candidate materials for next-
generation integrated circuits due to their superior comprehensive performance. However …

An in-depth exploration of the microstructure evolution and characterization of the
precipitates in a quaternary Cu–Ni–Co–Si alloy under different aging conditions was …

In this paper, a series of Cu-3.2 Ni-0.6 Co-xSi-0.2 Cr-0.15 Mg (x= 0.62, 0.75, 0.92 and
1.09)(wt.%) alloys were fabricated and subjected to multi-step thermo-mechanical treatment …