The effect of element Cu on microstructures and corrosion behavior of the directional
structure Ni-based coatings were investigated experimentally. The element Cu enhanced …

Conventional grain-boundary engineering (GBE) is not directly compatible with the
complicated geometric parts fabricated via laser powder bed fusion (LPBF) owing to the …

The surface segregation of Fe-Cr-Si alloys was studied using the X-ray photoelectron
spectroscopy (XPS). The experiment was performed in two stages, for the as-prepared …

Compositionally complex materials (CCMs) present a potential paradigm shift in the design
of magnetic materials. These alloys exhibit long-range structural order coupled with limited …

Molecular Dynamics simulation was employed to study precipitate composition dependence
on strengthening. Edge dislocation interaction with pure, 80at.%, and 60at.% Cr precipitates …

Fe-Cr matrix composite alloys were produced by hot pressing (HP) method then their
microstructure, mechanical, and oxidation properties were examined in detail. In composite …

The influence of the oxygen-induced surface segregation process of Cr and Si solutes on
the anti-corrosion properties of Fe–Cr and Fe–Cr–Si alloys was studied using X-ray …

The room temperature 57 Fe Mössbauer and XPS spectra were measured for polycrystalline
Fe 0.88 Cr 0.12 and Fe 0.85 Cr 0.15 alloys which were exposed to air at 870 K. The spectra …

Powders with nanometric crystallites of two ternary alloys Fe 0.90 Cr 0.05 Si 0.05 and Fe
0.85 Cr 0.10 Si 0.05 were prepared by mechanical alloying (MA) in a planetary high-energy …

In this study, we investigated a perpendicular magnetic anisotropy (PMA) in a ferromagnet/
antiferromagnetic stacking structure without using heavy metal elements. The Fe 0.6 Al …