Sensitivity and impedance measurements of UHF RFID chips
In this paper, we describe the sensitivity and impedance measurement method for UHF RF
identification (RFID) chips. The measurements are performed using an RFID tester (RFID …
identification (RFID) chips. The measurements are performed using an RFID tester (RFID …
Optimizing RFID network planning by using a particle swarm optimization algorithm with redundant reader elimination
The rapid development of radio frequency identification (RFID) technology creates the
challenge of optimal deployment of an RFID network. The RFID network planning (RNP) …
challenge of optimal deployment of an RFID network. The RFID network planning (RNP) …
Millimeter-wave identification—A new short-range radio system for low-power high data-rate applications
The radio-frequency identification (RFID) concept is expanded to millimeter-wave
frequencies and millimeter-wave identification (MMID) in this paper. The MMID concept and …
frequencies and millimeter-wave identification (MMID) in this paper. The MMID concept and …
Small on-metal UHF RFID transponder with long read range
K Jaakkola - IEEE Transactions on Antennas and Propagation, 2016 - ieeexplore.ieee.org
A new small on-metal UHF Radio Frequency Identification (RFID) transponder, 18 mm× 4
mm× 2 mm in size, is presented. The read range of the transponder has been optimized by …
mm× 2 mm in size, is presented. The read range of the transponder has been optimized by …
Ranging of UHF RFID tag using stepped frequency read-out
This paper presents a phase-based method for obtaining the distance of an RFID tag with
unknown properties. The tag's response is measured by the reader at several discrete …
unknown properties. The tag's response is measured by the reader at several discrete …
Screen-printed and spray coated graphene-based RFID transponders
K Jaakkola, V Ermolov, PG Karagiannidis… - 2D …, 2019 - iopscience.iop.org
We report ultra-high-frequency (UHF, 800 MHz–1 GHz) radio frequency identification (RFID)
transponders consisting of printed dipole antennas combined with RFID microchips. These …
transponders consisting of printed dipole antennas combined with RFID microchips. These …
Small antennas impedance and gain characterization using backscattering measurements
S Bories, M Hachemi, KH Khlifa… - Proceedings of the …, 2010 - ieeexplore.ieee.org
Experimental characterization of small antennas presents a practical problem when the
measurement cable is placed in the antenna reactive zone. By changing the current …
measurement cable is placed in the antenna reactive zone. By changing the current …
Backscattering-based measurement of reactive antenna input impedance
P Pursula, D Sandstrom… - IEEE Transactions on …, 2008 - ieeexplore.ieee.org
A scattering technique for measuring reactive antenna input impedance is described. The
antenna scattering is measured with three different loads: an open circuit, a conjugate …
antenna scattering is measured with three different loads: an open circuit, a conjugate …
The study of RFID authentication protocols and security of some popular RFID tags
HY Chien - Development and implementation of rfid technology, 2009 - books.google.com
A radio frequency identification (RFID) system consists of three components: radio frequency
(RF) tags (or transponders), RF readers (or transceivers), and a backend server. Tag …
(RF) tags (or transponders), RF readers (or transceivers), and a backend server. Tag …
Experimental Investigations on Enhanced GPR Detection Assisted by Broadband Metasurfaces
W Zheng, W Luo, T Hao - IEEE Transactions on Instrumentation …, 2024 - ieeexplore.ieee.org
Attenuation within the material under test (MUT) and reflection loss at interfaces of different
MUT layers make subsurface targets especially nonmetallic objects difficult to detect …
MUT layers make subsurface targets especially nonmetallic objects difficult to detect …