The effect of layer number and substrate on the stability of graphene under MeV proton beam irradiation
The use of graphene electronics in space will depend on the radiation hardness of
graphene. The damage threshold of graphene samples, subjected to 2MeV H+ irradiation …
graphene. The damage threshold of graphene samples, subjected to 2MeV H+ irradiation …
Hierarchical magnetic/chitosan/graphene oxide 3D nanostructure as highly effective adsorbent
FA Taher, FH Kamal, NA Badawy, AE Shrshr - Materials Research Bulletin, 2018 - Elsevier
The significance of contamination management is obviously the cornerstone of the human
future. Indeed, to find an efficient and economic approach to manage the dyeing effluents …
future. Indeed, to find an efficient and economic approach to manage the dyeing effluents …
Low-energy X-ray and ozone-exposure induced defect formation in graphene materials and devices
We have evaluated the responses of graphene materials and devices to 10-keV X-ray
irradiation and ozone exposure. Large positive shifts are observed in the current-voltage …
irradiation and ozone exposure. Large positive shifts are observed in the current-voltage …
Zeolitic Imidazolate Framework-Mediated Synthesis of Co3O4 Nanoparticles Encapsulated in N-Doped Graphitic Carbon as an Efficient Catalyst for Selective …
The aerobic solvent-free selective oxidation of the C–H bonds of hydrocarbons to the
corresponding ketones by earth-abundant catalysts would provide high added value both …
corresponding ketones by earth-abundant catalysts would provide high added value both …
[PDF][PDF] Re-synthesis and Electrochemical Characteristics of LiFePO4 Cathode Materials Recycled from Scrap Electrodes
HS Kim, EJ Shin - Bulletin of the Korean Chemical Society, 2013 - Citeseer
This paper describes an environmentally friendly process for the recovery of LiFePO4
cathode materials from scrap electrodes by a simple thermal treatment method. The active …
cathode materials from scrap electrodes by a simple thermal treatment method. The active …
[HTML][HTML] Near-surface structure and residual stress in as-machined synthetic graphite
We have used optical and electron microscopy and Raman spectroscopy to study the
structural changes and residual stress induced by typical industrial machining and …
structural changes and residual stress induced by typical industrial machining and …
The oxidization behavior and mechanical properties of ultrananocrystalline diamond films at high temperature annealing
K Huang, X Hu, H Xu, Y Shen, A Khomich - Applied surface science, 2014 - Elsevier
Ultrananocrystalline diamond (UNCD) films prepared by hot filament chemical vapor
deposition (HFCVD) were annealed at 1000° C in low degree vacuum under a pressure of …
deposition (HFCVD) were annealed at 1000° C in low degree vacuum under a pressure of …
Radiation-induced charge trapping and low-frequency noise of graphene transistors
We have performed a detailed evaluation of radiation-induced charge trapping and low-
frequency noise for back-gated graphene transistors fabricated on a thermal SiO 2 layer …
frequency noise for back-gated graphene transistors fabricated on a thermal SiO 2 layer …
Transmission electron microscopy, Raman and X-ray photoelectron spectroscopy studies on neutron irradiated polycrystalline graphite
Polycrystalline NBG-18 graphite irradiated by low fluence neutron was studied using
transmission electron microscopy, Raman and X-ray photoelectron spectroscopy. The …
transmission electron microscopy, Raman and X-ray photoelectron spectroscopy. The …