The objectives of this review paper are to document current practices in wet-freeze climate
zones and introduce emerging technologies that would be largely implemented in wet …

The primary objective of most procedures for asphalt concrete mix design is to find an
asphalt content that minimizes the possibility of stability failure while providing adequate …

An analytical model is developed for the mechanical degradation of asphalt cement and
mastic under repeated loading. The model is derived by applying the strain decomposition …

Despite the environmental and compaction benefits of warm mix asphalt (WMA), several
researchers have expressed concerns over laboratory and field performances of WMA …

Fatigue sensitivity of four different asphalt binders and three different asphalt mixes was
evaluated in the study. Binders were subjected to Linear Amplitude Sweep (LAS) test at …

通过室内四点弯曲疲劳试验, 选取ASTM D7460 的NfNM 疲劳判断标准, 采用单因素对比分析的
方法, 对橡胶沥青混合料疲劳性能的自愈合能力的主要影响因素(沥青用量, 试件破坏程度 …

Stabilized Emulsions (SE) is a Warm Mix Asphalt (WMA) technique that reduces mixing
temperatures to approximately 100° C, the range of WMA with the greatest reduction in …

A number of studies have suggested that limits for the loss stiffness of the binder, G* sin
delta, in the American Association of State Highway and Transportation Officials (AASHTO) …

The effects of in-place volumetric properties on the rutting and cracking of asphalt pavement
are of great interest to the pavement industry. As such, the major objectives of this paper are …

The asphalt binder specifications resulting from the Strategic Highway Research Program
(SHRP) Asphalt Research Program are performance-based and attempt to address the …