Supercritical fluids find use in various areas in oil and gas production operations due to their
unique properties. Supercritical CO 2 (sc-CO 2) with its reduced viscosity, increased …

Miscible CO 2 injection appears to be an important enhanced oil recovery technique for
improving sweep efficiency and eliminating CO 2-oil interfacial tension resulting in up to …

The carbon dioxide (CO2) based enhanced oil recovery methods (EORs) are considered
among the promising techniques for increasing the recovery factor from mature oil reservoirs …

Due to its lower viscosity and thus better injectivity than water, CO 2 injection has attracted
lots of attention in tight oil recovery. Lowering the minimum miscible pressure (MMP) of CO 2 …

An accurate determination of the minimum miscibility pressure (MMP) is required for the
miscible gas injection project in oilfield. The experimental methods are usually considered to …

In this paper, thermodynamic phase behaviour, implications, and strategies for the CO 2
storage process in the fractured tight/shale reservoirs (ie, nanoproes) with adsorptions are …

The paper presents the separation of liquid CO 2 from flue gases produced by oxy-fuel
combustion using a cryogenic method. The outlet N 2 stream from a nitrogen removal unit …

This paper gives a critical review of miscibility-measurement techniques published in the
open literature along with recommendations and lessons learned. Many of these published …

In this paper, two sandstone cores with permeabilities of 1.7 mD and 2.6 mD were employed
and the ScCO 2 huff-n-puff processes were carried out to check the oil recovery efficiency as …

The determination of the minimum miscibility pressure (MMP) assumes paramount
significance in evaluating CO 2 enhanced-oil recovery strategies. We created a microfluidic …