High temperature oxidation behavior of a novel Ni-Cr-W-Al-Ti superalloy
Oxidation of a novel Ni-19Cr-17W-2Al-0.5 Ti superalloy was investigated in air at 800–1100°
C. In spite of the local spallation of external oxide scale after prolonged oxidation at high …
C. In spite of the local spallation of external oxide scale after prolonged oxidation at high …
Formation and evolution behavior of M6C carbide in a Ni-W-Cr superalloy
M Huang, Z Zhou, C Cui, R Zhang, Z Shi, X Wang… - Materials …, 2023 - Elsevier
The carbide formation and evolution of a new Ni-26W-6Cr (wt.%) superalloy for the 800° C
molten salt reactor (MSR) was investigated by homogenization heat treatment tests and the …
molten salt reactor (MSR) was investigated by homogenization heat treatment tests and the …
Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys
Abstract Effect of Ti addition on oxidation behavior of Ni-Cr-W alloys was systematically
investigated by isothermal oxidation in air. The oxidation rate is accelerated by Ti addition …
investigated by isothermal oxidation in air. The oxidation rate is accelerated by Ti addition …
Corrosion of Incoloy 800H alloys with nickel cladding in FLiNaK salts at 850 C
The corrosion of 800H alloy with and without Ni-cladding, as well as GH3535 alloy, in
molten FLiNaK salts at 850° C has been investigated. Results show that Cr and Fe are …
molten FLiNaK salts at 850° C has been investigated. Results show that Cr and Fe are …
On the possibility of severe corrosion of a Ni-W-Cr alloy in fluoride molten salts at high temperature
The corrosion of a Ni-26W-6Cr alloy, as well as GH3535 alloy, in the FLiNaK salts at 800° C
was investigated by static immersion corrosion, combining with the electrochemical …
was investigated by static immersion corrosion, combining with the electrochemical …
Revealing 3D morphological and chemical evolution mechanisms of metals in molten salt by multimodal microscopy
Growing interest in molten salts as effective high-temperature heat-transfer fluids for
sustainable energy systems drives a critical need to fundamentally understand the …
sustainable energy systems drives a critical need to fundamentally understand the …
Effect of Zr addition on the microstructure and intermediate-temperature mechanical performance of a Ni–26W–6Cr based superalloy
In the present work, Zr was added into a Ni–26W–6Cr alloy to improve the intermediate
temperature ductility, and the corresponding mechanism was discussed. The enrichment of …
temperature ductility, and the corresponding mechanism was discussed. The enrichment of …
Optimized spacing of active sites in Ni-Mo catalysts enhances ethanol production in syngas conversion
Y Ren, Y Weng, S Meng, C Huang, Q Sun… - Applied Catalysis B …, 2025 - Elsevier
The direct conversion of syngas to ethanol is highly attractive but remains challenging due to
low CO conversion and poor EtOH/ROH. We investigated the conversion of syngas over a …
low CO conversion and poor EtOH/ROH. We investigated the conversion of syngas over a …
Metallic impurities induced corrosion of a Ni-26W-6Cr alloy in molten fluoride salts at 850 oC
The effect of metallic impurities on corrosion of a Ni-26W-6Cr alloy in molten FLiNaK salts at
850° C was investigated. Results show that the Ni-26W-6Cr alloy exhibits the same …
850° C was investigated. Results show that the Ni-26W-6Cr alloy exhibits the same …
Welding solidification cracking susceptibility and behavior of a Ni-28W-6Cr alloy
Welding solidification cracking of alloys is associated with the range of solidification
temperature that can be greatly affected by the amount of refractory metals and other …
temperature that can be greatly affected by the amount of refractory metals and other …