Physical and chemical processes of ammonium perchlorate and hydroxyl-terminated
polybutadiene (AP/HTPB) composite propellant combustion have been studied for several …

This paper focuses on the potential use of ammonia as a carbon-free fuel, and covers recent
advances in the development of ammonia combustion technology and its underlying …

Ammonia oxidation and ignition delay time measurements for pressures above 10 atm are
scarce. In addition, NH 3 is known to adsorb on stainless steel, so measurement results …

The different effects of N 2 and water steam dilution on the NO emission from a micromix H
2/air flame were experimentally and numerically studied. NO emission was measured using …

A commercially available natural gas fueled gas turbine engine was operated on hydrogen.
Three sets of fuel injectors were developed to facilitate stable operation while generating …

Local and Monte Carlo uncertainty analyses of NO production during methane combustion
were carried out, investigating the effect of uncertainties of kinetic parameters and …

Complex chemical mechanisms are increasingly used within models describing a range of
important chemical processes. Parameters describing the rates of chemical steps and …

Burning velocity and probe sampling measurements of the concentrations of O2, CO2, CO,
and NO in the postflame zone of the flames of H2+ CO+ CO2 and air are reported. The heat …

The NO characteristics for a steam diluted H 2/air micromix flame under various
characteristic nozzle diameters (d), equivalence ratio (φ) and steam dilution ratio (D) are …

The purpose of this paper is to show the application of global uncertainty analysis to
comprehensive and reduced kinetic models as a tool to identify important thermochemical …