As a carrier of deformation information, the speckle pattern, or more exactly the random
intensity distributions, which could be naturally occurred or artificially fabricated onto test …

In situ tensile tests, accompanied by scanning electron microscopy coupled with electron
backscatter diffraction (EBSD) analyses were performed on neutron-irradiated 304L steel …

In 2003 the authors proposed a model-reduction technique, called the Nonuniform
Transformation Field Analysis (NTFA), based on a decomposition of the local fields of …

In this study, the deformation behavior of a near-β Ti-17 titanium alloy under uniaxial tension
was investigated using electron backscatter diffraction (EBSD) and tensile tests with in situ …

It is important to evaluate microscopic stress distributions on the order of the grain size to
clarify the deformation and fracture behavior of structural materials. In this study, the …

A considerable amount of information can be gained from combined collection of both digital
image correlation (DIC) measurements, and of electron backscattered diffraction (EBSD) …

A ferrite-pearlite two-phase steel was investigated using in situ scanning electron
microscope (SEM) tensile testing combined with digital image correlation (DIC). Two …

摘要核反应堆压力容器作为核电站不可更换的关键性设备, 其设备完整性对核电站的安全运行起
着至关重要的作用. 在辐照条件下, 反应堆压力容器钢中会形成一系列微结构缺陷 …

摘要材料力学性能原位测试技术能够在力学性能测试过程中对材料使役过程中微观结构演化与
损伤失效机理进行表征分析, 研究材料成分, 工艺, 组织结构与力学性能, 使役行为之间的内在 …

During in situ mechanical tests performed on polycrystalline materials in a scanning electron
microscope, crystal orientation maps may be recorded at different stages of deformation from …