[HTML][HTML] In-vitro corrosion behavior of the cast and extruded biodegradable Mg-Zn-Cu alloys in simulated body fluid (SBF)
In the present study, a new biodegradable Mg-Zn-Cu magnesium alloy was introduced for
biological applications. The microstructural analysis showed the formation of MgZnCu …
biological applications. The microstructural analysis showed the formation of MgZnCu …
[HTML][HTML] Toward understanding the effects of solution heat treatment, Ag addition, and simultaneous Ag and Cu addition on the microstructure, mechanical properties …
In this study, the effects of adding silver (0.2 and 0.6 wt%) and copper (0.1 wt%) antibacterial
elements, on the microstructure, mechanical properties, and degradation behavior of the as …
elements, on the microstructure, mechanical properties, and degradation behavior of the as …
[HTML][HTML] Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5 Zn alloy with the addition of Ca, Sr, Ag, In and Cu
Y Jin, C Blawert, H Yang, B Wiese, F Feyerabend… - Materials & …, 2020 - Elsevier
The effects of micro-addition (0.2 wt.%) of Ca, Sr, Ag, In and Cu on the microstructure and
corrosion properties of the as-cast Mg-0.5 Zn alloy were systematically studied. It is found …
corrosion properties of the as-cast Mg-0.5 Zn alloy were systematically studied. It is found …
[HTML][HTML] Elucidation of the corrosion rate enhancement mechanism in Mg–Er–Gd–Ni alloys with high volume fraction of LPSO phase and different Gd contents after …
C Dai, S Zhang, Y Wang, J Wang, J Wang - Journal of Materials Research …, 2023 - Elsevier
The microstructure evolution and corrosion mechanism of Mg–9Er–xGd–2Ni alloys,
subjected to Gd addition and extrusion, were investigated in this study. Results shows that …
subjected to Gd addition and extrusion, were investigated in this study. Results shows that …
Combination of severe plastic deformation and heat treatment for enhancing the corrosion resistance of a new Magnesium alloy
In the present study, various processes have been carried out on the extruded Mg-4Zn-4Al-
0.6 Ca-0.5 Mn (wt%) alloy to achieve a low corrosion rate Magnesium (Mg) alloy …
0.6 Ca-0.5 Mn (wt%) alloy to achieve a low corrosion rate Magnesium (Mg) alloy …
Microstructure, Mechanical, and Corrosion Behavior of Al2O3 Reinforced Mg2Zn Matrix Magnesium Composites
A Ercetin, DY Pimenov - Materials, 2021 - mdpi.com
Powder metallurgy (PM) method is one of the most effective methods for the production of
composite materials. However, there are obstacles that limit the production of magnesium …
composite materials. However, there are obstacles that limit the production of magnesium …
[HTML][HTML] Advances in the modification of magnesium-based biomaterials to address corrosion and corrosion-fatigue: A review of developments and prospects
Magnesium implants are highly advantageous in orthopedic load-bearing applications due
to their biodegradable properties, which eliminate the need for a second surgical removal …
to their biodegradable properties, which eliminate the need for a second surgical removal …
[HTML][HTML] Effect of copper addition on precipitation behaviors and mechanical properties of Mg-Zn-Cu alloys with respect to high zinc
Y Zhou, S Li, P Mao, X Ai, Q Xiao, Z Liu - Journal of Magnesium and Alloys, 2024 - Elsevier
The current work deals with the precipitation behaviors and mechanical properties of the
high zinc content of the Mg-Zn-Cu system alloys using gravity casting. Differential scanning …
high zinc content of the Mg-Zn-Cu system alloys using gravity casting. Differential scanning …
Microstructure evolution and mechanical properties of the AZ91 magnesium alloy with Sr and Ti additions in the as-cast and as-aged conditions
Abstract Effect of different amounts of Sr and Ti additions with T6 heat treatment on
microstructure and mechanical properties of the AZ91 alloy was investigated. The …
microstructure and mechanical properties of the AZ91 alloy was investigated. The …
Influence of Cu addition on the microstructure, mechanical, and corrosion properties of extruded Mg-2% Zn alloy
Abstract Effects of different Cu concentrations on the microstructure, mechanical, and
corrosion properties of the extruded Mg-2% Zn alloy were studied by the use of x-ray …
corrosion properties of the extruded Mg-2% Zn alloy were studied by the use of x-ray …