To meet the growing need for energy efficiency in power electronics and electric machines,
a number of new soft magnetic materials are being investigated. Among them, high silicon …

Collecting state-of-the-art knowledge from information scattered throughout the literature,
this handbook describes magnetic materials and sensors, the testing of magnetic materials …

Abstract Selective Laser Melting (SLM), a powder-bed Additive Manufacturing technology,
can be used in combination with high temperature post-annealing to produce high-silicon …

Since its invention in the first half of the 19th Century, electrical machinery has established
itself as a fundamental component in several industrial sectors. In the form of motors …

The tensile deformation behavior of columnar-grained Fe–6.5 wt.% Si alloy with< 100> fiber
texture at intermediate temperatures (300–500° C) was investigated. Compared with …

The effects of Al content (0.53≤ Al≤ 9.65 wt%) on microstructure, texture, magnetic flux
density, permeability, core loss and magnetic domain structure of Fe-Al based electrical …

In our previous work, we demonstrated that thin sheets of 6.5 wt.% Si steel could be
fabricated by cold rolling with deformation induced disordering (DID). However, because the …

Fe-6.5 wt.% Si alloy foils with 95 mm in width and 0.30 mm in thickness were successfully
fabricated by cold rolling process. Excellent magnetic properties (H c= 20.4 A/m, µ m= 22 …

Melt spinning method has been widely applied for fabrication of Fe‐based amorphous/
nanocrystalline ribbons in industry. Compared with Fe‐based amorphous/nanocrystalline …

The effect of Cu addition in the range of 0–1.0 wt% on the magnetic induction and iron loss
of 6.5 wt% Si electrical steel is investigated. The microstructure and texture of the steels are …