In the present investigation, the effect of alloying elements on the austempering process,
austempered microstructure, and structural parameters of two austempered ductile irons …

In this research, different ductile irons and austempered ductile irons were successfully
developed using several alloying contents of nickel, copper and microalloying with niobium …

In the present work, Cu alloyed ductile iron was isothermally treated at five different
temperatures (280° C, 300° C, 320° C, 350° C, and 380° C) for 1 h to obtain an ausferrite …

It was evaluated the microstructural and mechanical response that a non alloyed ductile iron
(DI) presented when was subjected to Conventional Austempering (CA) and Stepped …

In present paper the effect of austempering conditions and alloying elements on the
microstructure, mechanical properties and processing window of Cu and Cu+ Ni alloyed …

The influence of austenitization and austempering parameters on the impact properties of
copper-alloyed and nickel-copper-alloyed austempered ductile irons (ADIs) has been …

The present study was performed to investigate the influences of short-time austenitization
on mechanical properties and transformation-induced plasticity (TRIP) in austempered …

An investigation was carried out to examine the influence of structural and mechanical
properties on wear behavior of austempered ductile iron (ADI). Ductile iron (DI) samples …

Present investigations involve a systematic study on the machinability of austempered
ductile irons (ADI) developed from four commercially viable ductile irons alloyed with …

In the present study, the authors investigated the effect of the austenitizing temperature (860
to 1020° C) on the microstructure evolution, hardness, wear resistance and corrosion …