Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM)
In this study, the hot turning of Monel-400 has been performed to investigate the influence of
four machining factors (cutting speed, feed rate, depth of cut and workpiece temperature) on …
four machining factors (cutting speed, feed rate, depth of cut and workpiece temperature) on …
Study on turning performance of PVD TiN coated Al2O3+ TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
Due to their excellent chemical stability, hardness and abrasion resistance, ceramic cutting
tools are suitable for operations at very high cutting speeds, which play a decisive role in …
tools are suitable for operations at very high cutting speeds, which play a decisive role in …
Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718
This paper is concerned with the numerical and experimental investigation of the flame heat
machining nickel base alloy. Machining is carried out by uncoated carbide inserts at two …
machining nickel base alloy. Machining is carried out by uncoated carbide inserts at two …
Analysis of chip geometry in hot machining of Inconel 718 alloy
AK Parida - Iranian Journal of Science and Technology …, 2019 - Springer
In the present work, the effect of heating temperature on the workpiece surface in orthogonal
machining of Inconel 718 on chip geometry in terms of chip segmentation, shear band …
machining of Inconel 718 on chip geometry in terms of chip segmentation, shear band …
Numerical analysis of chip geometry on hot machining of nickel base alloy
In this present study, the relation between the heating temperature and chip geometry has
been studied using DEFORM software. Due to low thermal conductivity, the Inconel 718 …
been studied using DEFORM software. Due to low thermal conductivity, the Inconel 718 …
Modeling and optimization of flank wear and surface roughness of Monel-400 during hot turning using artificial intelligence techniques
This work aims to model and investigate the effect of cutting speed, feed rate, depth of cut
and the workpiece temperature on surface roughness and flank wear (responses) of Monel …
and the workpiece temperature on surface roughness and flank wear (responses) of Monel …
Analysis of Chips Geometry and Parametric Optimization using Grey Relational Analysis (GRA) in Hot Turning of AISI 202
Hot turning is a method that assists in metal cutting by applying heat, especially useful for
dealing with difficult-to-machine materials. Such challenging materials typically possess …
dealing with difficult-to-machine materials. Such challenging materials typically possess …
Parametric investigation of photochemical machining of SS-430 for manufacturing of micromesh
Photochemical machining (PCM) is an emerging method for machining of very thin and
difficult-to-cut material with complex geometrical profile. PCM is one of recommended …
difficult-to-cut material with complex geometrical profile. PCM is one of recommended …
3D simulation analysis of hot machining of nickel alloy
FEM simulation software has been used in machining of Inconel-718 alloy to calculate the
forces, temperature, stress and chip morphology in the present study. Johnson-cook material …
forces, temperature, stress and chip morphology in the present study. Johnson-cook material …