High‐performance solid oxide fuel cells require a thin and gas‐tight electrolyte membrane
that must be coated on a porous and relatively rough support. A pretreatment of the …

Additive manufacturing (AM) is a quickly expanding technology that has various uses in
different fields. Many AM-techniques involves stages in which diffusion processes play an …

This article discusses continuum modeling, which is the most relevant approach in modeling
grain growth, densification, and deformation during sintering. Continuum plasticity models …

Supersolidus liquid phase sintering (SLPS) is an important liquid phase sintering variant that
is used to densify prealloyed powders. The densification behaviour of a boron doped 316L …

Master sintering curves (MSC s) were constructed for tape cast NiO, YSZ and NiO/YSZ
composite materials using apparent activation energies obtained through dilatometry …

In order to study the dynamic mechanical properties of molybdenum under high strain rates,
experiments are conducted using Hopkinson dynamic compression testing of a small-sized …

Thermal cycle designs for sintering and thermal decomposition processes are one of the
most critical steps to produce quality components using any of the several particulate …

Supersolidus liquid phase sintering (SLPS) is a variant of liquid phase sintering. In SLPS,
prealloyed powders are heated between the solidus and liquidus temperature of the alloy …

An analysis of tungsten heavy alloys is performed with respect to their suitability as model
systems for liquid phase sintering, based on the following factors: 1) confirmation of basic …

Zirconia-based ceramic is widely used due to their extraordinary qualities; it will be a very
useful topic to choose zirconia as research focus. The microstructure control may be …