Spectroscopic studies, molecular structure optimization and investigation of structural and electrical properties of novel and biodegradable Chitosan-GO polymer …
This article covers the molecular structure optimization and spectroscopic studies, such as
Raman, UV–Vis absorption and FTIR, carried out for novel, biodegradable and …
Raman, UV–Vis absorption and FTIR, carried out for novel, biodegradable and …
Optical and electrical properties of biocompatible and novel (CS–GO) polymer nanocomposites
The objective of this paper is to give information about the optical and electrical
characteristics measured of the CS–GO PNCs (chitosan-graphene oxide polymer …
characteristics measured of the CS–GO PNCs (chitosan-graphene oxide polymer …
Rietveld refinement, optical, dielectric and ac conductivity studies of Ba-doped SrSnO3
Abstract The samples SrSnO 3 (SBS0) and Sr 0.98 Ba 0.02 SnO 3 (SBS2) were synthesized
using sol–gel route, followed by calcination at 1073 K. Rietveld refinement analysis of XRD …
using sol–gel route, followed by calcination at 1073 K. Rietveld refinement analysis of XRD …
Scaling studies of temperature dependence of electric conductivity and electric modulus spectra of solid solution Sr2-xLaxSnO4 (x≤ 0.10) Ruddlesden Popper Oxide
The mixed ionic and electronic conductor oxide with formula Sr 2-x La x SnO 4 (S2LS) within
x≤ 0.10 were synthesized via the conventional ceramic route and investigated. The …
x≤ 0.10 were synthesized via the conventional ceramic route and investigated. The …
Synthesis and physical properties of nanopowder and electrical properties of bulk samples of ZnFe2-xNixO4 (x: 0, 0.05, 0.10)
Abstract The Ni modified samples ZnFe 2-x Ni x O 4 with x= 0, 0.05, and 0.10 were
synthesized using the sol-gel combustion method at 60° C. The phase of obtained samples …
synthesized using the sol-gel combustion method at 60° C. The phase of obtained samples …
Structural, dielectric, magnetic and magneto-dielectric properties of (1 − x)BiFeO3–(x)CaTiO3 composites
Abstract (1− x) BiFeO3–(x) CaTiO3 [(1− x) BFO–(x) CTO,(x= 0, 0.1, 0.2 and 0.3)] composites
were synthesized using sol–gel chemical method. Rietveld refinement was performed on X …
were synthesized using sol–gel chemical method. Rietveld refinement was performed on X …
Structural Changes from Conventional SrSnO3 to Ruddlesden–Popper Sr2SnO4 Perovskites and Its Implication on Photoluminescence and Optoelectronic …
Symmetry and structure studies of perovskites have attracted significant attention owing to
their many scientific and technological applications in multiferroic and optoelectronics. This …
their many scientific and technological applications in multiferroic and optoelectronics. This …
Study of structural, optical, dielectric, and electric properties of homovalently substituted Ce in SrTiO3 perovskite oxide
The samples SrTi1-xCexO3 with x as 0.0. 02 and 0.04 were prepared via a conventional
ceramic route. The XRD analysis showed that the pure and doped samples crystallized into …
ceramic route. The XRD analysis showed that the pure and doped samples crystallized into …
Influence of La doping on structure, AC conductivity and impedance spectroscopy of Ba2SnO4 Ruddlesden Popper oxide
A few compositions of (Ba 1-x La x) 2 SnO 4 with 0≤ x≤ 0.10 have prepared via solid-state
ceramic route followed by calcination at 1000° C for 8 h. The preliminary phase of samples …
ceramic route followed by calcination at 1000° C for 8 h. The preliminary phase of samples …
Structural, optical and electrical properties of Mn-doped ZnFe2O4 synthesized using sol–gel method
Abstract The system Zn1-xMnxFe2O4 (x= 0, 2, and 4%) was prepared by sol–gel chemical
route at 80° C. X-Ray powder diffraction and Raman spectrum analysis were used to …
route at 80° C. X-Ray powder diffraction and Raman spectrum analysis were used to …