Abstract Powder Bed Fusion (PBF) techniques constitute a family of Additive Manufacturing
(AM) processes, which are characterised by high design flexibility and no tooling …

Recently, the γ′-strengthened superalloys are of great interests in high temperature
applications due to their excellent high temperature strength which is derived from the γ …

Linear friction welding is a solid-state, near-net shape manufacturing method for metallic
alloys which is characterised by complex deformation and metallurgical actions at the weld …

The Laves phase in the as-built Inconel 718 (IN718) superalloy is known as undesirable
phase, which limits the industrial applications of the manufactured parts. Post-processing in …

The thermal deformation behavior of as-forged Al–Zn–Mg-(Cu) aluminum alloy at strain rate
0.001–1 s− 1, temperature 663–783 K and deformation degree 0–60% was studied by …

The dynamic recrystallization (DRX) mechanisms of Inconel 740 superalloy were studied by
electron backscatter diffraction (EBSD) analysis of the superalloy microstructures obtained …

In the present work, the high-temperature deformation behavior of a U720LI alloy was
investigated by means of hot compression tests at temperatures of 1060–1180° C, strain …

A critical evaluation of recrystallization vs. strain induced boundary migration (SIBM) as the
mechanism responsible behind the grain boundary engineering (GBE) in alloy 617 is made …

Components manufactured by laser powder bed fusion (LPBF) are limited by their
performance for use in critical applications. LPBF materials have microstructural defects …

Influence of strain rate on dynamic and post-dynamic recrystallization kinetics of Inconel 718
is investigated by performing hot compression tests at constant strain rate in the range …