Application of cold plasma in nanofillers surface modification for enhancement of insulation characteristics of polymer nanocomposites: a review
NM Saman, MH Ahmad, Z Buntat - IEEE Access, 2021 - ieeexplore.ieee.org
Polymer nanocomposites have gained much attention among researchers due to their
excellent characteristics, such as high thermal resistivity and the ability to withstand higher …
excellent characteristics, such as high thermal resistivity and the ability to withstand higher …
Influence of plasma functionalization treatment and gold nanoparticles on surface chemistry and wettability of reactive-sputtered TiO2 thin films
Amorphous titanium oxide (TiO 2) thin films were deposited on silicon substrates by DC-
magnetron sputtering at room temperature. The surface of thin films were treated in argon …
magnetron sputtering at room temperature. The surface of thin films were treated in argon …
ZnO/Carbon xerogel photocatalysts by low-pressure plasma treatment, the role of the carbon substrate and its plasma functionalization
ZnO is known to be photocatalytic, but with limited performances due to the strong electron-
hole recombination after irradiation. The integration of ZnO nanomaterials on a conductive …
hole recombination after irradiation. The integration of ZnO nanomaterials on a conductive …
Understanding the influence of surface oxygen groups on the electrochemical behavior of porous carbons as anodes for lithium-ion batteries
The present study elucidates the role of surface oxygen functional groups on the
electrochemical behavior of porous carbons when used as anodes for Li-ion batteries. To …
electrochemical behavior of porous carbons when used as anodes for Li-ion batteries. To …
Surface characterization of plasma-modified carbon fiber: Correlation between surface chemistry and morphology of the single strand
D Gravis, S Moisan, F Poncin-Epaillard - Surfaces and Interfaces, 2020 - Elsevier
To prepare cohesive polymeric composite, plasma-modified carbon fibers (CF) were
prepared. Among the different strategies to modify the CF surface, the plasma …
prepared. Among the different strategies to modify the CF surface, the plasma …
Tuning the magnetism of plasma-synthesized iron nitride nanoparticles: application in pervaporative membranes
The present work reports on the low-pressure, radio-frequency, plasma-driven synthesis of ε-
Fe3N-type nanoparticles homogeneously deposited on a high-surface-area porous carbon …
Fe3N-type nanoparticles homogeneously deposited on a high-surface-area porous carbon …
Low-pressure plasma process for the dry synthesis of cactus-like Au-TiO2 nanocatalysts for toluene degradation
The development of environment-friendly, low-cost and efficient catalyst preparation
processes has always been a major issue in the field of catalysis. Wet chemistry methods …
processes has always been a major issue in the field of catalysis. Wet chemistry methods …
Surface modification of high Cu-loaded activated carbon fiber adsorbent by air plasma
B Huang, X Yang, S Song, S Zi, Y Ma, K Li - Journal of Environmental …, 2024 - Elsevier
The ACF adsorbent with high Cu loading was treated with dielectric barrier discharge
plasma to mitigate the negative effects of high Cu loading and enhance PH 3 and H 2 S …
plasma to mitigate the negative effects of high Cu loading and enhance PH 3 and H 2 S …
Defective Pt–Ni/graphene nanomaterials by simultaneous or sequential treatments of organometallic precursors by low‐pressure oxygen plasma
A strategy to reduce critical raw metals in nanocatalysts is to synthesize nanocomposites
based on defective or bimetallic nanoparticles deposition on carbon nanomaterials …
based on defective or bimetallic nanoparticles deposition on carbon nanomaterials …
低温等离子体构筑高效Ni 基催化剂进展
彭冲， 刘鹏， 胡永康， 肖文德， 潘云翔 - 化工进展, 2021 - hgjz.cip.com.cn
Ni 基催化剂价格低廉, 资源丰富, 活性出色, 但其抗积炭能力差, 易因严重积炭而失活的问题始终
是限制其应用的瓶颈, 如何提升Ni 基催化剂抗积炭能力是学术界和工业界极为关注的问题 …
是限制其应用的瓶颈, 如何提升Ni 基催化剂抗积炭能力是学术界和工业界极为关注的问题 …