The effect of in-situ reactive incorporation of MoOx on the corrosion behavior of Ti-6Al-4 V alloy coated via micro-arc oxidation coating

M Kaseem, HC Choe - Corrosion Science, 2021 - Elsevier
In an attempt to examine the impacts of molybdenum oxides (MoO x) on the corrosion
behavior of Ti-6Al-4 V alloy, a series of micro-arc oxidation (MAO) coating was conducted in …

[PDF][PDF] 飞秒激光诱导医用金属材料表面功能微纳结构的研究进展

王翼猛, 管迎春 - Chinese Journal of Lasers, 2022 - researching.cn
摘要随着社会发展和医疗健康事业的进步, 医用金属植入物等医疗器械在临床应用中出现的细菌
感染, 生物相容性不佳等瓶颈亟待解决. 近年来, 飞秒激光以其加工精度高, 适用材料广 …

Biofunctionalized nanocomposite coating on Cp-titanium with reduce implant failures

K Madhu, S Kannan, A Perumal, P Shanmugam - Vacuum, 2023 - Elsevier
Titanium alloys are extensively used in orthopedic implants due to their excellent
physicochemical properties and good biocompatibility. However, in reality, titanium implants …

Taguchi optimization of PEO process parameters for corrosion protection of AA7075 alloy

F Songur, E Arslan, B Dikici - Surface and Coatings Technology, 2022 - Elsevier
In this study, oxide coatings were grown by plasma electrolytic oxidation (PEO) process to
enhance the corrosion resistance of the AA7075 alloys. The effect of process parameters on …

Investigation of corrosion and wear performance of TiNbTaZr/Cr-Mo PVD coatings on 316L SS in Hanks's solution for improved biomedical applications

I Atmaca, B Dikici, KV Ezirmik, AG Bulutsuz… - Surface and Coatings …, 2023 - Elsevier
Abstract 316L stainless steel is popular due to its strength, durability, and especially cost-
effectiveness in biomedical implant applications. However, the primary drawback of those …

Systematic characterization and enhanced corrosion resistance of novel β-type Ti-30Zr-5Mo biomedical alloys with halloysite nanotubes (HNTs) and zirconia (ZrO2) …

M Topuz, B Dikici, AE Kasapoglu, X Zhao… - Materials Today …, 2024 - Elsevier
This study investigates synthesis, the in-vitro corrosion resistance and adhesion
performance of PLA-based composite coatings reinforced with halloysite nanotubes (HNT) …

Investigation of in-vitro bioactivity, electrochemical corrosion, wettability and adhesion properties of bioglass-based coatings modified with Y2O3 and Zr on novel β …

B Dikici, Y Say, X Zhao, M Niinomi… - Surface and Coatings …, 2024 - Elsevier
In this study, the in-vitro bioactivity, electrochemical corrosion resistance, wettability, and
adhesion properties of bioglass-based coatings modified with Y 2 O 3 and ZrO 2 on Ti-30Zr …

A comparative study on the machinability of β-type novel Ti29Nb13Ta4. 6Zr (TNTZ) biomedical alloys under micro-milling operation

K Aslantas, B Demir, AS Guldibi, M Niinomi… - Journal of Manufacturing …, 2023 - Elsevier
Abstract β-type Ti29Nb13Ta4. 6Zr (TNTZ) alloy is a new-generation alloy that does not
contain toxic/allergic elements. The alloys have low Young's modulus (⁓ 60 GPa) close to …

Graphene reinforced hybrid-bioceramic coatings on porous-Ti6Al4V for biomedical applications: morphology, corrosion resistance, and cell viability

N Aslan, B Aksakal, B Dikici, ZA Sinirlioglu - Journal of Materials Science, 2022 - Springer
The effect of Hydroxyapatite (HA)-based coatings reinforced with reduced graphene oxide
(rGO) on porous-Ti6Al4V (P-Ti6Al4V) alloys in terms of electrochemical corrosion and cell …

Electrical properties of Al-Si surface composites through surface mechanical alloying on severe plastic deformed Al substrates

MR Ebrahim, AM Labeeb, I Battisha - Journal of Alloys and Compounds, 2023 - Elsevier
Surface mechanical alloying 'SMA'with Si powder on Al was used to achieve surface
composite with improved dielectric properties compared with coarse-grained and annealed …