The authors review the recent advances in the development of high‐strength titanium alloys.
First, they summarize conventional strengthening approaches and their mechanisms …

This work aimed to investigate the effect of Fe and Ta contents on the β→ α ″martensitic
transformation as well as the microstructure and mechanical properties of the as-cast …

Titanium alloys, especially β-type alloys containing β-stabilizing elements, constitute a
highly versatile category of metallic materials that have been under constant development …

After preforming by selective laser sintering and subsequently post-heating at 1000° C and
1200° C, porous Ti–Mo alloys with 4, 6 and 8wt.% Mo contents display two characteristic …

In this study, the microstructures and mechanical properties of Ti–10Mo and Ti–20Mo alloys
(mass%) are investigated to assess the potential use in biomedical applications. The …

The densification behavior and mechanical properties of spark plasma sintered titanium-
molybdenum alloys were investigated in this paper. All Ti-(4, 8, 12, 16, and 20 wt%) Mo …

Abstract β-Titanium alloys have been widely used in medical and surgical implants.
However, the present titanium alloys are facing challenges from implant-associated …

Soft tissue adhesion on titanium represents a challenge for implantable materials. In order to
improve adhesion at the cell/material interface we used a new approach based on the …

Low-cost β-type Ti–14Mn–(x) Zr (x= 0, 3, or 6 wt%) alloys were developed and prepared
using single-electrode arc furnace, and the effects of the zirconium (Zr) content and …

The formation of grain boundary (GB) brittle carbides with a complex three-dimensional (3-
D) morphology can be detrimental to both the fatigue properties and corrosion resistance of …