To achieve polymer-based composites for electronic packaging with low dielectric constant,
low dielectric loss tangent and high thermal conductivity, silane coupling agent KH550 …

Abstract Polytetrafluroethylene (PTFE)–Mg 2 SiO 4 composites have been prepared using
both micron and nano-ceramic fillers by hot pressing. The dielectric properties of the …

Dielectric substrates with low dielectric constant and good thermal stability are highly
desired for high-frequency and high-speed signal transmission. It is however challenging to …

MgTiO3 filled PTFE composite substrates were fabricated for microwave circuit applications.
The filler content in the PTFE matrix was varied from 30 to 70 wt%. Low loss MgTiO3 ceramic …

A study on Na 1/2 Sm 1/2 TiO 3 filled and glassfiber reinforced polytetrafluoroethylene
(PTFE) composites was described. The GF content was a fixed value of 4 wt%, and the NST …

TiO 2 and SiO 2 filled polytetrafluoroethylene (PTFE) composite substrates were fabricated
for microwave circuit applications. The total content of TiO 2 and SiO 2 fillers was a fixed …

The properties of Polytetrafluoroethylene (PTFE) filled with two kinds of binary mixtures of
silica particles with different size distribution (ie, 2 μm+ 15 μm and 5 μm+ 15 μm) were …

Fused amorphous SiO 2 filled polytetrafluoroethylene (PTFE) microwave substrate
composites were manufactured. The composition of all the samples was 57 wt% SiO 2 and …

The alumina/glass fibers cloth/polytetrafluoroethylene composites were prepared by
blending impregnation followed by hot compression method, and the dielectric, thermal, and …

PTFE-based microwave composites filled with SiO 2 dielectric ceramic (PTFE/SiO 2) were
prepared by powder processing technique followed by hot pressing. The effects of …