Ferroelectricity in La 2 Zr 2 O 7 thin films with a frustrated pyrochlore-type structure

S Saitzek, Z Shao, A Bayart, A Ferri, M Huvé… - Journal of Materials …, 2014 - pubs.rsc.org
Thin films of lanthanum zirconate (La2Zr2O7) have been grown by a sol–gel route on (110)-
oriented SrTiO3 substrates. Electrical measurements, locally performed by piezoresponse …

Highly textured La2Zr2O7 buffer layers for YBCO-coated conductors prepared by chemical solution deposition

K Knoth, R Hühne, S Oswald, L Schultz… - Superconductor …, 2005 - iopscience.iop.org
Abstract Recent results of La 2 Zr 2 O 7 (LZO) buffer layer development for YBa 2 Cu 3 O 7−
x (YBCO-) coated conductors are presented. The major achievement is the development of a …

Synthesis and characterization of semiconductor tin oxide thin films on glass substrate by sol–gel technique

O Culha, MF Ebeoglugil, I Birlik, E Celik… - Journal of sol-gel science …, 2009 - Springer
In this study, synthesis and characterization of semiconductor tin oxide (SnO 2) thin films on
glass substrate were systematically investigated by using sol–gel technique for gas sensing …

Transient thermal stress analysis of CeO2 thin films on Ni substrates using finite element methods for YBCO coated conductor

F Sen, E Celik, M Toparli - Materials & design, 2007 - Elsevier
The effect of residual stresses of CeO2 buffer layers on Ni substrate for YBCO coated
conductors is considered. CeO2 films were fabricated on Ni tape substrate from the solutions …

Fabrication of La2Zr2O7 buffer layers on Ni tapes by reel-to-reel sol–gel technique

E Celik, Y Akin, W Sigmund, YS Hascicek - Materials Science and …, 2004 - Elsevier
In order to investigate the optimal conditions for highly orientated and epitaxial buffer layers
on textured Ni tapes, we have deposited perovskite textured La2Zr2O7 (LZO) films on Ni …

Nb-doped SrTiO3 buffer layers on LaAlO3 substrates by metalorganic deposition for YBCO superconducting films

E Celik, Y Yamada, I Hirabayashi, Y Shiohara - Materials Science and …, 2004 - Elsevier
The metalorganic deposition (MOD) method has been developed as a low-cost process for
YBCO-coated conductor. In this study, Nb-doped SrTiO3 (Nb-STO) buffer layers have been …

Texturing influence of process parameters in sol–gel Tb2O3 buffer layers on Ni tapes for YBCO coated conductors

E Celik, YS Hascicek - Materials Science and Engineering: B, 2002 - Elsevier
In this study, texturing influence of process parameters in sol–gel Tb2O3 buffer layers on
textured Ni tapes was evaluated. A solution deposition process was used to grow epitaxial …

XPS depth profiling investigations on La2Zr2O7 layers prepared by chemical solution deposition

S Oswald, K Knoth, B Holzapfel - Microchimica Acta, 2006 - Springer
La 2 Zr 2 O 7 (LZO) layers have been recently investigated as potential buffer layers for
superconducting YBa 2 Cu 3 O 7–x coated conductors deposited on Ni tapes. Chemical …

Growth of Nd2O3 buffer layers on Ni tapes by reel-to-reel sol–gel process for YBCO coated conductors

E Celik, YS Hascicek - Materials Science and Engineering: B, 2004 - Elsevier
In this study, Nd2O3 buffer layers were deposited on textured Ni tapes using a reel-to-reel
sol–gel process for YBa2Cu3O7− x (YBCO) coated conductors. Depending on processing …

Sol-gel Tb/sub 2/O/sub 3/buffer layers on Ni tapes for YBCO coated conductors

E Celik, Y Akin, W Sigmund… - IEEE transactions on …, 2003 - ieeexplore.ieee.org
In this study, processing of Tb/sub 2/O/sub 3/buffer layers on textured Ni tapes were
evaluated for YBa/sub 2/Cu/sub 3/O/sub 7-x/(YBCO) coated conductor. A solution deposition …