This article presents an overview of the developments in stainless steels made since the
1990s. Some of the new applications that involve the use of stainless steel are also …

The intergranular corrosion (IGC) resistance of 316L stainless steel (316L SS) produced by
selective laser melting (SLM) was investigated using microscopy analysis and …

Grain boundary engineering (GBE) is considered to be an attractive approach to
microstructure control, which significantly enhances the grain-boundary-related properties of …

Formation of M23C6 carbides and chromium-depleted zones in commercially available type
304L stainless steel were investigated by in situ transmission electron microscopy and …

Thermo-mechanical processes involving both single and multiple cycles of low level (5%)
strain and annealing were applied to specimens of a type 304 austenitic stainless steel in …

The individual and synergistic effects of the microstructural features viz. grain size, residual
strain, grain boundary character distribution (GBCD) and its connectivity on intergranular …

In this study, solution annealed AISI type 304 L stainless steel (SS) was thermo-
mechanically processed (TMP) by introducing different cold-rolled 20 and 40 percentages …

A double loop electrochemical potentiokinetic reactivation (DL-EPR) test was conducted to
investigate the relationship between the evolution of delta-ferrite and the intergranular …

This communication describes observations of unexpected microstructural interface
susceptibility to accelerated dissolution in additively manufactured (AM) Type 316L stainless …

The present work elucidates the individual implication of wide spectrum of grain size on
degree of sensitization (DOS) and intergranular corrosion in alloy 600H. Experimental …