Seven-core Ag/Fe sheathed Sr 0.6 K 0.4 Fe 2 As 2 (Sr-122) superconducting wires were
produced by the ex situ powder-in-tube method. The relationship between the cold-work …

Lamellar MgB2 grains were synthesized by Cu-activated sintering at low temperature. We
found that the Mg–Cu liquid can provide a constant liquid environment and the formation of …

Single-and four-core MgB 2 wires have been manufactured by internal magnesium diffusion
(IMD) into boron. Initial hydrostatic extrusion was applied for single-core Cu sheathed wire …

The effect of annealing temperature on the microstructure, magnetic and mechanical
properties of MgB2 superconducting samples has been studied. The study consists of XRD …

The dynamic microindentation experimental technique was used to characterize the
mechanical properties of intermetallic MgB2. The indentation load–displacement curves of …

Single-and four-core MgB 2 wires have been manufactured by internal magnesium diffusion
(IMD) into boron. Longitudinal uniformity of the composite wires has been checked by X-ray …

Stabilized seven-core MgB 2 cable has been made from two-axially rolled single-core wires
with a Ti/Cu sheath. It was shown that drawing deformation applied prior to braiding …

SiC doped MgB 2/Ti/Cu wires have been made by powder-in-tube technique using
precursor prepared by mixing of MgB 2 (ex situ) with Mg, B (in situ) in variable ex situ/in situ …

This book addresses new ways to optimize the fabrication process and performance of iron-
based superconducting wires and tapes based on the powder-in-tube (PIT) method. Further …

SiC doped MgB 2/Ti/Cu wires have been made by powder-in-tube technique using
precursor prepared by mixing of MgB 2 (ex situ) with Mg, B (in situ) in variable ex situ/in situ …