A review of particulate reinforcement theories for polymer composites

S Ahmed, FR Jones - Journal of materials science, 1990 - Springer
A concerted survey is presented of the existing theories for predicting the strength and
modulus of particulate-filled polymeric composites. The macroscopic behaviour of …

Failure mechanisms in toughened epoxy resins—A review

AC Garg, YW Mai - Composites Science and Technology, 1988 - Elsevier
The subject of improving the fracture toughness of brittle epoxy resins is receiving significant
attention in order to improve the design strain of fiber-reinforced composites for aerospace …

[HTML][HTML] Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

SY Fu, XQ Feng, B Lauke, YW Mai - Composites Part B: Engineering, 2008 - Elsevier
There have been a number of review papers on layered silicate and carbon nanotube
reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate …

Toughening mechanisms of nanoparticle-modified epoxy polymers

BB Johnsen, AJ Kinloch, RD Mohammed, AC Taylor… - Polymer, 2007 - Elsevier
An epoxy resin, cured with an anhydride, has been modified by the addition of silica
nanoparticles. The particles were introduced via a sol–gel technique which gave a very well …

The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles

TH Hsieh, AJ Kinloch, K Masania, AC Taylor… - Polymer, 2010 - Elsevier
The present paper considers the mechanical and fracture properties of four different epoxy
polymers containing 0, 10 and 20wt.% of well-dispersed silica nanoparticles. Firstly, it was …

Fundamental aspects of nano-reinforced composites

B Fiedler, FH Gojny, MHG Wichmann… - Composites science and …, 2006 - Elsevier
The present paper highlights the potential of the CNTs as nanofillers in polymers, but also
stresses out the limitations and challenges one has to face dealing with nanoparticles in …

Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies

RA Pearson, AF Yee - Journal of materials science, 1991 - Springer
The principal toughening mechanism of a substantially toughened, rubber-modified epoxy
has again been shown to involve internal cavitation of the rubber particles and the …

Ionic liquid-impregnated ZIF-8/polypropylene solid-like electrolyte for dendrite-free lithium-metal batteries

X Qi, D Cai, X Wang, X Xia, C Gu… - ACS Applied Materials & …, 2022 - ACS Publications
Metal–organic framework (MOF)-based solid-like electrolytes have attracted more
prospective due to the combined merits of solid-state electrolytes and liquid electrolytes …

Modification of epoxy resin using reactive liquid (ATBN) rubber

N Chikhi, S Fellahi, M Bakar - European Polymer Journal, 2002 - Elsevier
Epoxy resins are widely utilised as high performance thermosetting resins for many
industrial applications but unfortunately some are characterised by a relatively low …

In vitro investigation of the influence of printing direction on the flexural strength, flexural modulus and fractographic analysis of 3D-printed temporary materials

A KEßLER, R Hickel, N Ilie - Dental materials journal, 2021 - jstage.jst.go.jp
The aim of this in vitro study was to evaluate the effect of printing direction and aging on the
mechanical strength of 3D-printed temporary resin-based composites. Three hundred and …