Titanium alloy is widely used as oil drill pipe material because of its light weight, high
strength, good toughness, corrosion resistance, fatigue resistance, and good process …

In recent years, the industry has demanded high hardness, wear resistance, corrosion
resistance, and other properties for critical components made of steel and its alloys …

Abstract Al 0.3 CoCrFeNi high-entropy alloy (HEA) was additively manufactured by laser
melting deposition (LMD) with emphasis on its microstructure and tensile properties. The …

In this paper, the corrosion-wear-resistant alloy steel gradient material for camshaft was
successfully prepared by direct laser deposition (DLD). The phase evolution, microstructure …

In the present work, the influence of the pulse voltage and pressure on the treatment glow
discharge characteristics and consequently on the surface properties obtained for low …

In this work, the wear resistance and impact toughness of the carburized layer were
improved by rare earth (RE) doped supersonic fine particle bombardment (SFPB) …

A gradient alloy steel prepared by laser melting deposition (LMD) was subjected to two heat
treatments (quenching-intercritical quenching denoted as Q-IQ and quenching-intercritical …

Under extreme conditions such as high speed and heavy load, 18Cr2Ni4WA steel cannot
meet the service requirements even after carburizing and quenching processes. In order to …

AISI 316L stainless steel has received considerable attention as a common material for key
ball valve components; however, its properties cannot be improved through traditional …

The formation and diffusion of plasma are complex and critical processes in plasma
nitriding. A stable and high-concentration plasma atmosphere can effectively increase the …