Thermal spray high-entropy alloy coatings: a review
High-entropy alloys (HEAs) are a new generation of materials that exhibit unique
characteristics and properties, and are demonstrating potential in the form of thermal spray …
characteristics and properties, and are demonstrating potential in the form of thermal spray …
Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process
Analysis of the sliding wear and microstructural characteristics of iron based composite
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
Research and development of welding methods and welding mechanism of high-entropy alloys: A review
In this paper, the solid-state welding and fusion welding of high-entropy alloys (HEAs) were
reviewed. For solid-state welding of HEAs, the influence of microstructure change and …
reviewed. For solid-state welding of HEAs, the influence of microstructure change and …
Microstructural and tribological resistance of flame-sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co composite coatings remelted by microwave energy
The hard facing composite coatings such as CoMoCrSi/30% WC-CrC-Ni and
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment
LY Chen, T Xu, S Lu, ZX Wang, S Chen… - Surface and Coatings …, 2018 - Elsevier
NiCrBSi alloy coatings deposited by atmospheric plasma spray technology were heated at
440° C, 460° C, and 480° C for a short-time respectively to achieve a better understanding of …
440° C, 460° C, and 480° C for a short-time respectively to achieve a better understanding of …
Study on the effect of Ni60 transition coating on microstructure and mechanical properties of Fe/WC composite coating by laser cladding
T Wu, W Shi, L Xie, M Gong, J Huang, Y Xie… - Optics & Laser …, 2023 - Elsevier
Two coatings, ie a single Fe/WC cladding layer and a combination of a Fe/WC cladding
layer and a Ni60 transition coating, were prepared on the surface of 60Si2Mn spring steel …
layer and a Ni60 transition coating, were prepared on the surface of 60Si2Mn spring steel …
Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating
LH Tian, W Xiong, C Liu, S Lu, M Fu - Journal of Materials Engineering …, 2016 - Springer
Due to the advantages such as high strength, high hardness and good wear resistance, high-
entropy alloys (HEAs) attracted more and more attentions in recent decades. However, most …
entropy alloys (HEAs) attracted more and more attentions in recent decades. However, most …
Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coating
LY Chen, H Wang, C Zhao, S Lu, ZX Wang… - Surface and Coatings …, 2019 - Elsevier
Thermal sprayed NiCrBSi coatings often have some shortcomings such as poor cohesion
and adhesion, which degrade their properties and are expected to be eliminated by the …
and adhesion, which degrade their properties and are expected to be eliminated by the …
Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High‐Entropy Alloy Coatings
High entropy alloys (HEAs) represent a new class of advanced metallic alloys that exhibit
unique structural features and promising properties. The potential benefit of HEAs, in …
unique structural features and promising properties. The potential benefit of HEAs, in …
Microstructure and tribological behavior of flame sprayed and microwave fused CoMoCrSi/CoMoCrSi–Cr3C2 coatings
This present work deals with the investigation of dry sliding wear behavior of CoMoCrSi and
CoMoCrSi–Cr 3 C 2 depositing on titanium substrate through Flame spray process …
CoMoCrSi–Cr 3 C 2 depositing on titanium substrate through Flame spray process …