Abstract Effects of Mg and Si (Mg 2 Si) concentration on the thermochemical behaviour,
solidification, thermal stability and oxidation of Al-Mg 2 Si composites have been …

In this study, the tribological properties of Al–15Mg 2 Si (AC), Al–15Mg 2 Si–3TiB 2–TiAl 3
(C31), and Al–15Mg 2 Si–5TiB 2–4TiAl 3 (C54) in-situ composites were evaluated. In the as …

Abstract Al-Mg 2 Si composites have been developed through gravity die-casting
techniques. The influence of Mg 2 Si reinforcement concentration on strength …

This investigation involved the development and characterization (microstructure,
mechanical properties, and dry sliding wear characteristics) of Al-Mg2Si composites for …

Abstract A near eutectic Al-12.6 Si alloy was developed with 0.0 wt%, 2.0 wt%, 4.0 wt%, and
6.0 wt% Al-5Ti-1B master alloy. The microstructural morphology, hardness, tensile strength …

Abstract Al-17.6 Si-XBi (X= 0.0, 0.5, 1.0, 1.5 and 2.0 wt%) alloys have been synthesized
using gravity casting technique to study the influence of Bi concentration on the …

Abstract Effect of manganese (Mn) addition (0.0, 1.0, 2.0 and 3 wt%) on the microstructural
morphology, hardness, tensile properties and fracture behaviour of the gravity cast eutectic …

The study investigates the microstructural evolution and wear behavior of Al–12.6 Si–0.25
Fe–xMn alloys (x= 0, 1, 2, and 3 wt%) in dry sliding wear experiments. Manganese (Mn) …

ABSTRACT The effect of Zr (0.1, 0.3, 0.5 wt.%) addition on microstructural morphology,
hardness, mechanical properties and fracture behaviour of gravity cast Al-12.4 Si alloy has …

Deformation behaviour, micromechanical response, and failure initiation of Al–Mg 2 Si
composites have been investigated in terms of stress-strain flow behaviour and localization …