Apatite calcium phosphates have been synthesized at pH 9–11, Ca/P= 1.50–1.67 under
variable isolation conditions. A complex procedure for identification of inclusion of …

Biocompatible calcium phosphates were synthesized by mixing calcium-and phosphate-
containing solutions in medium with various pH value, which contained up to 6 vol.% of …

In this work, novel bone substitutes in the form of biomicroconcretes with high surgical
handiness and satisfactory mechanical properties were developed. Materials were …

On the basis of calcium phosphate compositions with a 30% polyvinyl alcohol content, three-
dimensional mockups have been obtained using 3D bioprinting. It is shown that at a content …

The introduction of 10–50%(by weight) brushite powder, preheated at 50° and then fired at
1200° C, into a permeating suspension based on hydroxyapatite powder heat-treated at …

Введение в пропитывающую суспензию на основе порошка гидроксиапатита,
термообработанного при 800 С, 10-50%(по массе) порошка брушита, прогретого при …

A simple and scalable method, spray drying, for fabricating mesoporous β-tricalcium
phosphate (β-TCP) was developed. The spray-dried powders were characterized using X …

The mineralization of octacalcium phosphate (OCP) crystals in gel media was studied in the
presence of a magnetic field. OCP crystal growth was found to be dependent on …

Composite polylactide materials based on hydrated calcium phosphates (amorphized
hydroxyapatite and brushite) promising for 3D printing of osteoplastic biomaterials are …

CaP granules are used for open defect of bone. The important feature in the physical
structure of a synthetic ceramic is its porosity. Pore structure is great importance for …