Poor room temperature (RT) ductility is an inherent disadvantage of magnesium (Mg) alloys,
which limits their wide application. Grain refinement is an accepted method to improve …

Formation of profuse I 2-type solute-enriched stacking faults (SESFs) in fine grains and
transformation of SESFs to 18R-long period stacking ordered (LPSO) phase are attained in …

A new low-alloyed Mg-2Sm-0.8 Mn-0.6 Ca-0.5 Zn (wt.%) alloy is prepared by low-
temperature and low-speed extrusion. The as-extruded alloy has ultra-high yield strength …

Poor formability at room temperature is a key problem that limits the application of Mg alloys.
Formability is closely dependent on both large work-hardening capacity and high tensile …

This review article provides overall understanding of stainless, environment-friendly, and
nonflammable Mg alloys (SEN alloys) recently developed at the Korea Institute of Materials …

Two new low-alloyed Mg—2RE—0.8 Mn—0.6 Ca—0.5 Zn (wt%, RE= Sm or Y) alloys are
developed, which can be produced on an industrial scale via relatively high-speed …

Heterogeneous bimodal microstructure and its formation mechanism of Mg-Gd-Y-Zn-Zr alloy
during isothermal compression at 450° C and 0.001 s− 1 was investigated in detail. Based …

Simultaneously improving the yield strength (YS) and formability at room temperature of
magnesium (Mg) alloys is one of the key issues to broaden the application further. In this …

Obtaining ultra-high strength in commercial ZK60 wrought alloys is rather difficult by
conventional processes due to their limited precipitation hardening. In this work, we …

Magnesium alloys with excellent comprehensive properties need to be developed due to the
urgent demand in vibration and noise reduction or elimination fields. Herein, a novel high …