Among the severe plastic deformation processing (SPD) of materials, high-pressure torsion
(HPT) is known to induce considerable amounts of plastic strain and crucial grain refinement …

During the last decade, equal-channel angular pressing (ECAP) has emerged as a widely-
known procedure for the fabrication of ultrafine-grained metals and alloys. This review …

The focus of this article is texture development in metals of fcc, bcc, and hcp crystal structure
processed by a severe plastic deformation (SPD) technique called equal-channel angular …

A combination of accumulative roll bonding (ARB) and rolling is used to fabricate
nanolamellar Cu–Nb multilayers with individual layer thicknesses (h) of 600μm⩾ h⩾ 10nm …

Microstructure and texture evolution of pure copper (99.95%) after equal-channel angular
pressing (ECAP) with route Bc up to 12 passes and subsequent heat treatment were …

We study the texture evolution and deformation mechanisms in a Zr/Nb layered composite
using a combination of electron backscattered diffraction, dislocation density evolution …

In this work, a high-manganese Fe–23Mn–1.5 Al–0.3 C Twinning-Induced Plasticity (TWIP)
steel was subjected to plastic shear deformation using Equal-Channel Angular Pressing …

This paper focuses on scaling of Equal-Channel Angular Pressing (ECAP) from
conventional, laboratory scale (billet cross section 15× 15 mm 2) to large scale (50× 50 mm …

This paper provides an introduction in the field of severe plastic deformation (SPD). First of
all the main methods to produce SPD materials are discussed. In the following section, the …

Aluminum alloy 6061-T6511 was printed by additive friction stir deposition onto a cast
aluminum A206-T4 plate. Metallography, X-ray powder diffraction, X-ray pole figure analysis …