Review on the current status of the co-combustion technology of organic solid waste (OSW) and coal in China

H Liu, Y Wang, S Zhao, H Hu, C Cao, A Li, Y Yu… - Energy & …, 2020 - ACS Publications
Increasing economy and population result in the rapid growth of solid waste in China, with
more than 70% being carbonaceous components. The generated carbon-bearing solid …

[HTML][HTML] Technical properties of biomass and solid recovered fuel (SRF) co-fired with coal: Impact on multi-dimensional resource recovery value

E Iacovidou, J Hahladakis, I Deans, C Velis… - Waste Management, 2018 - Elsevier
The power plant sector is adopting the co-firing of biomass and solid recovered fuel (SRF)
with coal in an effort to reduce its environmental impact and costs. Whereas this intervention …

Combustion behavior of coal pellets blended with Miscanthus biochar

YH Li, HT Lin, KL Xiao, J Lasek - Energy, 2018 - Elsevier
To achieve reductions in CO 2 emissions, replacing fossil fuels with biomass in thermal
power generation is becoming increasingly prevalent. In general, the fuel nature and …

SO2, NOx, HF, HCl and PCDD/Fs emissions during Co-combustion of bituminous coal and pickling sludge in a drop tube furnace

S Zhang, X Jiang, G Lv, B Liu, Y Jin, J Yan - Fuel, 2016 - Elsevier
The influence of co-combustion of bituminous coal and pickling sludge on SO 2, NO x, HF,
HCl and PCDD/Fs emissions was studied in a drop tube furnace. To simulate the …

Numerical investigation Greek lignite/cardoon co-firing in a tangentially fired furnace

E Karampinis, N Nikolopoulos, A Nikolopoulos… - Applied Energy, 2012 - Elsevier
The present study presents a three-dimensional numerical model for co-firing lignite and
biomass in large-scale utility boilers. The model takes into account the non-spherical form of …

Numerical simulation of brown coal combustion in a 550 MW tangentially-fired furnace under different operating conditions

AH Al-Abbas, J Naser, EK Hussein - Fuel, 2013 - Elsevier
In the present paper, a computational fluid dynamics (CFD) modeling study was performed
for the combustion of the brown coal in a large-scale tangentially-fired furnace (550MW) …

Refined weighted sum of gray gases model for air-fuel combustion and its impacts

C Yin - Energy & Fuels, 2013 - ACS Publications
Radiation is the principal mode of heat transfer in utility boiler furnaces. Models for radiative
properties play a vital role in reliable simulations of utility boilers and simulation-based …

A modeling approach to co-firing biomass/coal blends in pulverized coal utility boilers: Synergistic effects and emissions profiles

R Pérez-Jeldres, P Cornejo, M Flores, A Gordon… - Energy, 2017 - Elsevier
Pulverized coal power plants in Chile are evaluating to reduce CO 2 emissions by co-firing
coal with biomass, which is CO 2-neutral. A computational fluid dynamics model was used in …

Co-combustion of pulverized coal and solid recovered fuel in an entrained flow reactor–General combustion and ash behaviour

H Wu, P Glarborg, FJ Frandsen, K Dam-Johansen… - Fuel, 2011 - Elsevier
Co-combustion of a bituminous coal and a solid recovered fuel (SRF) was carried out in an
entrained flow reactor, and the influence of additives such as NaCl, PVC, ammonium …

Evaluation, comparison and validation of deposition criteria for numerical simulation of slagging

C Wieland, B Kreutzkam, G Balan, H Spliethoff - Applied energy, 2012 - Elsevier
The objective of this study is the comparison of various sticking probabilities based on three
different approaches:(1) empirical viscosity models,(2) experimental results based on ash …