Dissimilar welding of duplex stainless steel with Ni alloys: A review
This review article presents an overview of the dissimilar welded joint's microstructure and
mechanical behavior. Dissimilar metal weldings are generally employed in high-pressure …
mechanical behavior. Dissimilar metal weldings are generally employed in high-pressure …
Dissimilar joining of the martensitic grade P91 and Incoloy 800HT alloy for AUSC boiler application: Microstructure, mechanical properties and residual stresses
The presented study intends to analyze the microstructure and corresponding mechanical
characteristics of P91 and Incoloy 800HT dissimilar welded joint (DWJ). The thermo-physical …
characteristics of P91 and Incoloy 800HT dissimilar welded joint (DWJ). The thermo-physical …
Study on evaluation of through-thickness residual stresses and microstructure-mechanical property relation for dissimilar welded joint of modified 9Cr–1Mo and …
Abstract Gas Tungsten Arc Welded dissimilar joint of modified 9Cr–1Mo (P91) and SS304H
steel plate is prepared using Ni-based ERNiCrCoMo-1 super alloy filler and are post-weld …
steel plate is prepared using Ni-based ERNiCrCoMo-1 super alloy filler and are post-weld …
Study on microstructure and mechanical properties of laser welded dissimilar joint of P91 steel and INCOLOY 800HT nickel alloy
This investigation attempts to explore the weld characteristics of a laser welded dissimilar
joint of ferritic/martensitic 9Cr-1Mo-V-Nb (P91) steel and Incoloy 800HT austenitic nickel …
joint of ferritic/martensitic 9Cr-1Mo-V-Nb (P91) steel and Incoloy 800HT austenitic nickel …
Study on effect of weld groove geometry on mechanical behavior and residual stresses variation in dissimilar welds of P92/SS304L steel for USC boilers
This research article reports the correlation between microstructure, mechanical properties,
and residual stresses of dissimilar weld joints (DWJs) between P92 martensitic steel and …
and residual stresses of dissimilar weld joints (DWJs) between P92 martensitic steel and …
Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel …
In the present investigation, a detailed microstructure and mechanical behaviour study for
P91 welded joint were investigated. The welded joint was produced using the Gas Tungsten …
P91 welded joint were investigated. The welded joint was produced using the Gas Tungsten …
Mechanical behavior of austenitic stainless-steel welds with variable content of δ-ferrite in the heat-affected zone
V García-García, F Reyes-Calderón… - Engineering Failure …, 2022 - Elsevier
Abstract δ-ferrite solidified in the fusion zone (FZ) mitigates the microfissuring susceptibility
in multi-pass welded joints performed on austenitic stainless steel (ASS). The herein …
in multi-pass welded joints performed on austenitic stainless steel (ASS). The herein …
Study on microstructure and mechanical properties of aluminum–copper dissimilar metals joints by nanosecond laser spiral welding
Q Cheng, P Zhang, H Shi, Z Yu - Transactions of the Indian Institute of …, 2022 - Springer
Aluminum–copper dissimilar metals were successfully welded by nanosecond laser and
optical galvanometer scanning. The joint formation, microstructure characteristics, and …
optical galvanometer scanning. The joint formation, microstructure characteristics, and …
Microstructural and mechanical characterization of pre-used SA 335 P91 super-heater pipe weldment used in 70 MW CFBC boilers
SS Prabu, S Sujai, S Prathiba… - Proceedings of the …, 2022 - journals.sagepub.com
The enhanced SA 335 P91 steels are specially designed to be used in the super-heaters in
thermal power plants which are commonly operated at an elevated temperature. The …
thermal power plants which are commonly operated at an elevated temperature. The …
Microstructural characterization of dissimilar weld joint between ferritic steel and stainless steel
K Karthick, S Malarvizhi… - Materials Science and …, 2021 - Taylor & Francis
In this investigation, microstructural variation across the dissimilar weld joint between
modified 9Cr-1Mo ferritic steel and 316LN stainless steel with nickel-based filler metal was …
modified 9Cr-1Mo ferritic steel and 316LN stainless steel with nickel-based filler metal was …