Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment
AH Abdelrazek, IA Choudhury, Y Nukman… - The International Journal …, 2020 - Springer
The quality enhancement during massive production of the traditional machining products is
a risky challenge when the cost and environmental impact must be considered. The tool life …
a risky challenge when the cost and environmental impact must be considered. The tool life …
[HTML][HTML] Influence of Al2O3/MoS2 hybrid nanofluid MQL on surface roughness, cutting force, tool wear and tool life in hard turning
The improvement of hard machining efficiency has been a growing concern in the
production practice while the environmental friendly characteristics have to be guaranteed …
production practice while the environmental friendly characteristics have to be guaranteed …
[HTML][HTML] Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy
The machining of titanium alloys like Ti6Al4V has been challenging owing to their low
thermal conductivity, making them highly difficult-to-cut. Many techniques have been …
thermal conductivity, making them highly difficult-to-cut. Many techniques have been …
Wear and breakage of TiAlN-and TiSiN-coated carbide tools during high-speed milling of hardened steel
In the high-speed machining of hardened steel for the die and mould industry, determining
how to reduce the wear of coated carbide tools and improve their machining efficiency and …
how to reduce the wear of coated carbide tools and improve their machining efficiency and …
Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys
YY Chang, HM Lai - Surface and Coatings Technology, 2014 - Elsevier
Abstract Recently, multicomponent CrAlSiN and TiAlSiN coatings have been developed in
order to gain high hardness and good thermal stability. In this study, the influence of TiAlN …
order to gain high hardness and good thermal stability. In this study, the influence of TiAlN …
Performance of Al2O3 nanofluids in minimum quantity lubrication in hard milling of 60Si2Mn steel using cemented carbide tools
In this article, an attempt has been made to explore the potential performance of Al2O3
nanoparticle–based cutting fluid in hard milling of hardened 60Si2Mn steel (50-52 HRC) …
nanoparticle–based cutting fluid in hard milling of hardened 60Si2Mn steel (50-52 HRC) …
Applicability of DLC and WC/C low friction coatings on Al2O3/TiCN mixed ceramic cutting tools for dry machining of hardened 52100 steel
The present work examines the applicability of DLC and WC/C low friction coatings on Al 2
O 3/TiCN based mixed ceramic cutting tools for the dry and hard turning of AISI 52100 steel …
O 3/TiCN based mixed ceramic cutting tools for the dry and hard turning of AISI 52100 steel …
High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology
N He, H Li, L Ji, X Liu, H Zhou, J Chen - Tribology International, 2016 - Elsevier
TiAlSiN coatings were produced with different Al and Si contents by hybrid PVD technology.
The tribological properties of TiAlSiN coatings from room temperature to 800° C were …
The tribological properties of TiAlSiN coatings from room temperature to 800° C were …
The effect of aCN/TiAlN coating on tool wear, cutting force, surface finish and chip morphology in face milling of Ti6Al4V superalloy
H Çalışkan, M Küçükköse - International Journal of Refractory Metals and …, 2015 - Elsevier
As a widely used material in aerospace and medical industry, Ti6Al4V titanium alloy is
regarded as difficult-to-machine. In this study, aCN/TiAlN coating was deposited on carbide …
regarded as difficult-to-machine. In this study, aCN/TiAlN coating was deposited on carbide …
Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825
A Thakur, S Gangopadhyay - Tribology International, 2016 - Elsevier
The influence of tribological properties of coated tools on performance during machining of
nickel-based super alloy is not well reported. The current study comparatively evaluated …
nickel-based super alloy is not well reported. The current study comparatively evaluated …