Transition in the rate-dependent mechanical response of rock was investigated due to the
presence of impersistent joint with different infill conditions. Four types of samples, ie intact …

The effect of flaw inclination angle on the mechanical behaviour of rock-like specimens
containing a pre-existing flaw under different infill conditions is investigated under dynamic …

This investigation examines transient heat generation and the thermal-mechanical response
of epoxy resin subjected to quasi-static and dynamic compression. High-speed optical and …

An analytical method is presented for the prediction of compressive strength at high strain
rate loading for composites. The method is based on variable rate power law. Using this …

In this work, original shock experiments are presented. Laser-induced shock and shear
wave propagations have been observed in an epoxy resin, in the case of femtosecond laser …

Strain rate has significant effect on mechanical behavior of the thermoset polymers. The rate
sensitivity is more complicated for thermoset nanocomposites, which compose of two quite …

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the
experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic …

The high strain rate behaviour of toughened epoxy is explored under compressive loadings.
A cycloaliphatic epoxy was toughened using different types of preformed fillers: epoxy …

This article describes the occurrence of the recent natural fiber hybrid composite
mistreatment as strengthening with the hybrid materials using fiber and polyester matrix and …

Zur Berechnung von Bauteilen in hybrider Bauweise unter ballistischer Beanspruchung Page 1
Manuel Roth Zur Berechnung von Bauteilen in hybrider Bauweise unter ballistischer …