This paper presents an analytical solution for the rope-sheave contact problem in static
conditions, also applicable to belt-pulley problems and similar mechanisms. The rope is …

In lifting systems used for the vertical transport of bulk materials and individual items or
persons, so-called frictional force transmission between a steel cable and pulley is used …

To address the issue of tension fluctuations and deviations among the strands during cable-
twisting production, it is necessary to establish a relationship model between the centrifugal …

An analytical solution is presented to the problem of determining the force effect of lifting
vessel (skip) on guides during its movement in the mine shaft. Forces values are obtained …

Stress relaxation happens to a wire cable that is often wrapped around a pulley during a
long-term service process, which causes mechanical performance degradation of the wire …

The friction lining is a critical component of the friction hoist, serving as the driving force for
lifting through its interaction with the wire rope. Monitoring the friction state between the wire …

Cable-hole transmission is widely applied in cable-driven mechanisms to reduce the
mechanical size. However, the driving tension is attenuated with the cable threading through …

To be able to carry out a high-quality analysis of the operation and design of elevator
systems with a driving pulley, it is necessary to determine the size of the losses that occur in …

Рассмотрена задача создания компьютерной модели (цифрового двойника) шахтной
подъемной установки (ШПУ) для одноконцевого подъема с укрупненными основными …

This study develops a new model for the dynamic analysis of hoisting mechanisms. In the
proposed approach, the segment of wire rope wound around the drum is modelled as a …