Functionally graded materials (FGMs) revealed an immense growth with world-wide
demand. This paper details a critical review on the periodic transformation in FGM …

Even though the importance of composites as engineering materials is identified in the last
century, the actual research hunt started completely in the recent years. These materials …

The microstructure evolution and mechanical properties of Al-7Si-0.35 Mg alloy with varied
amounts of submicron-sized TiC particles addition were investigated. The results indicated …

In this article, aspects related to A319 (AlSi5Cu3) and A356 (AlSi7Mg) alloy are covered
owing to their prominent role in the automotive and aerospace industries. It is important to …

The morphology and structure of microcracks extending toward B 4 C were investigated from
a joint obtained by sandwiching Al foil between two B 4 C ceramic plates and heat-treating …

This research is an experimental comparison study to show the influence of mold type
casting on mechanical properties. The study considers the aluminum alloy of a gasoline …

The current investigation, nano‐multi‐powder particles, 5 and 10 wt.% boron carbide (B4C)
and graphite (Gr) are utilized as a reinforcement, and aluminium LM 25 alloy is used as a …

Metal matrix composites consisting of Al-alloy as matrix and B 4 C particles as ceramic
reinforcement are widely used for numerous advanced applications requiring high strength …

AlSiMgMn alloy was made by the sand casting under vacuum (SCUV) process at an
absolute pressure of 53 mbar and compared its microstructure and mechanical properties …

Electromagnetic stir casting (EMSC) is a highly effective process to produce the metal matrix
composite (MMC) because of the uniform mixing of reinforcement with the matrix. The …