Waste tyre valorization by catalytic pyrolysis–A review
The environmental concern associated with waste tyre disposal and the necessity of
sustainable waste management policies has promoted the development of waste tyre …
sustainable waste management policies has promoted the development of waste tyre …
Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires
Abstract The 7· 10 6 t of waste tires that are generated yearly represent for a potential source
of fuels considering its composition, rich in C and H, and its chemical features. Waste tires …
of fuels considering its composition, rich in C and H, and its chemical features. Waste tires …
Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor
M Arabiourrutia, G Elordi, G Lopez, E Borsella… - Journal of Analytical and …, 2012 - Elsevier
The thermal pyrolysis of three different polyolefin plastics (HDPE, LDPE and PP) has been
carried out in a conical spouted bed reactor. This technology is especially interesting …
carried out in a conical spouted bed reactor. This technology is especially interesting …
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Continuous pyrolysis of polystyrene has been studied in a conical spouted bed reactor with
the main aim of enhancing styrene monomer recovery. Thermal degradation in a …
the main aim of enhancing styrene monomer recovery. Thermal degradation in a …
Product yields and compositions in the continuous pyrolysis of high-density polyethylene in a conical spouted bed reactor
The pyrolysis of high-density polyethylene (HDPE) has been carried out in the range
between 500 and 700° C in continuous mode in a pilot-plant unit equipped with a conical …
between 500 and 700° C in continuous mode in a pilot-plant unit equipped with a conical …
Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis
AR Fernandez-Akarregi, J Makibar, G Lopez… - Fuel processing …, 2013 - Elsevier
An original pyrolysis pilot plant provided with a conical spouted bed reactor has been
designed and built for treating 25kg/h of biomass. The scale-up of the process has been …
designed and built for treating 25kg/h of biomass. The scale-up of the process has been …
Pyrolysis of sawdust in a conical spouted‐bed reactor with a HZSM‐5 catalyst
The effect was studied of using in‐situ catalyst based on a HZSM‐5 zeolite in flash pyrolysis
with an inert gas (N2) of sawdust of pinus insignis in a conical spouted‐bed reactor in the …
with an inert gas (N2) of sawdust of pinus insignis in a conical spouted‐bed reactor in the …
Kinetic study of high density polyethylene (HDPE) pyrolysis
SM Al-Salem, P Lettieri - Chemical engineering research and design, 2010 - Elsevier
In this study, 15mg samples of high density polyethylene (HDPE) were pyrolysed in an
isothermal thermogravimetric set-up in a micro-thermobalance reactor with pre-set …
isothermal thermogravimetric set-up in a micro-thermobalance reactor with pre-set …
Operating conditions for the pyrolysis of poly-(ethylene terephthalate) in a conical spouted-bed reactor
Continuous pyrolysis of poly-(ethylene terephthalate)(PET) was performed in a conical
spouted-bed reactor. This reactor is especially suitable for this process, because of its …
spouted-bed reactor. This reactor is especially suitable for this process, because of its …
Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor
The pyrolysis of polyolefins (low-density and high-density polyethylene and polypropylene)
in a new kind of reactor, a conical spouted bed, has been studied in the 450− 600° C range …
in a new kind of reactor, a conical spouted bed, has been studied in the 450− 600° C range …