The thermodynamic optimization of Ti-Si-X systems requires that their respective binary
systems are constantly updated. The Ti-Si system has been experimentally investigated …

The literature contains many contradictory data about the most thermodynamically favorable
structure of precipitates in α-Ti matrix of the hypoeutectoid Ti–Si alloys. In this work we …

Abstract The TiC-AlSi12 composite coating was successfully prepared on Ti-6Al-4V
substrate via mechanical alloying. the process parameters including powder weight ratio …

The thermodynamic optimization of Ti-X-Si systems requires that their respective binary
systems be constantly updated. The most recent assessments of the Ti-Si phase diagrams …

An Al–Si composite coating was synthesised on Ti–6Al–4 V alloy substrate by means of
mechanical alloying. The as-synthesised coating had a composite structure. The effects of …

The interfacial reactions of continuous SiC fiber reinforced Ti-6Al-4V matrix composite (SiC
f/Ti-6Al-4V composite) and continuous SiC fiber coated by C reinforced Ti-6Al-4V matrix …

Ti-rich Ti–Si–B alloys can be considered for structural applications at high temperatures
(max. 700° C), however, phase equilibria data is reported only for T= 1250° C. Thus, in this …

Wetting behavior of AlN by Cu alloys has been studied in vacuum through sessile drop
technique. The contact angle was determined by high temperature photography and shape …

The investigation of as-cast Ti–18Nb–$ x $ Si alloys with silicon content from 0.6 to 1.2% wt.
is carried out. The formation of silicides at various heat treatment conditions (temperature …

Several commercial alloys use silicon (Si) to improve titanium (Ti) resistance to creep and
oxidation at high temperatures and to improve Ti corrosion resistance in acid media …