Investigation of mechanical, tribological and magnetic properties after plasma nitriding of AISI 316L stainless steel produced with different orientations angles by …
In this study, AISI 316L stainless steel samples were produced with different orientations (0°,
45°, and 90°) using selective laser melting (SLM). In addition, plasma nitriding of the …
45°, and 90°) using selective laser melting (SLM). In addition, plasma nitriding of the …
Evolution of microtexture and performance in TaC/316L composites fabricated by laser powder bed fusion
J Yan, X Meng, B Ou, Y Xie, B Cai, Y Zhang… - Materials Today …, 2024 - Elsevier
The laser powder bed fusion (LPBF) was used to fabricate 316 L stainless steel samples
strengthened with 0, 0.5, 1.0, and 1.5 vol% tantalum carbide (TaC). The effects of the TaC …
strengthened with 0, 0.5, 1.0, and 1.5 vol% tantalum carbide (TaC). The effects of the TaC …
Effect of scan speed on corrosion and tribocorrosion properties of cobalt-chromium alloy in situ produced by selective laser melting
Purpose This paper aims to investigate the influence of scan speed on the corrosion and
tribocorrosion features of the CoCrMoW samples fabricated via the selective laser melting …
tribocorrosion features of the CoCrMoW samples fabricated via the selective laser melting …
Protein adsorption, cell viability and corrosion properties of Ti6Al4V alloy treated by plasma oxidation and anodic oxidation
The hardness, wettability, and electrochemical properties of Ti6Al4V alloy surfaces treated
with anodic oxidation and plasma oxidation as well as the viabilities of the different cell lines …
with anodic oxidation and plasma oxidation as well as the viabilities of the different cell lines …
Influence of scanning velocity on a CoCrMoW alloy built via selective laser melting: microstructure, mechanical, and tribological properties
In this study, CoCrMoW samples were produced by selective laser melting (SLM). The
influence of scanning velocity on the microstructure, mechanical, and wear properties of the …
influence of scanning velocity on the microstructure, mechanical, and wear properties of the …
Enhanced Tribocorrosion and Corrosion Resistance of R4 Grade Mooring Chain Steel through Hybrid Ceramic Coatings
O Çomaklı, E Meletlioğlu - Ceramics International, 2025 - Elsevier
This study investigates the microstructure, corrosion resistance, and tribocorrosion
properties of a hybrid ceramic layer applied to R4-grade mooring chain steel. The coatings …
properties of a hybrid ceramic layer applied to R4-grade mooring chain steel. The coatings …
Correlation between the microstructure and corrosion performance of the HIPIMS nitrided bio-grade CoCrMo alloy
Corrosion performance of CoCrMo alloy (F75) plasma nitrided with High-Power Impulse
Magnetron Sputtering (HIPIMS) technique was thoroughly investigated. Open Circuit …
Magnetron Sputtering (HIPIMS) technique was thoroughly investigated. Open Circuit …
Bio-tribocorrosion resistance of CoB–Co2B and Co2B layers on CoCrMo alloy
AM Delgado-Brito, I Mejía-Caballero… - Journal of Vacuum …, 2024 - pubs.aip.org
Cobalt-based alloys, such as cobalt-chromium-molybdenum (CoCrMo), are known for their
high mechanical strength and find extensive applications in the biomedical field such as …
high mechanical strength and find extensive applications in the biomedical field such as …
Assessment of Mechanical Behavior in H13 Tool Steel Synthesized through Electron Beam Melting and Selective Laser Melting Techniques
This study investigates H13 tool steel's microstructure and mechanical properties using
selective laser melting (SLM) and electron beam melting (EBM). SLMed‐H13 steel has fine …
selective laser melting (SLM) and electron beam melting (EBM). SLMed‐H13 steel has fine …
CoCrMo alloy as biomaterial for bone reconstruction in oral and maxillofacial surgery: a scoping review
JI Zuchuat, AC Cura, AS Manzano, OA Decco - 2020 - ri.conicet.gov.ar
Background: Osseointegration allowed for a breakthrough in biomaterials and techniques
and it has contributed to increased application of dental implants. However, insufficient bone …
and it has contributed to increased application of dental implants. However, insufficient bone …