In-situ experimental and high-fidelity modelling tools to advance understanding of metal additive manufacturing
Metal additive manufacturing has seen extensive research and rapidly growing applications
for its high precision, efficiency, flexibility, etc. However, the appealing advantages are still …
for its high precision, efficiency, flexibility, etc. However, the appealing advantages are still …
Data‐driven approaches toward smarter additive manufacturing
The latest industrial revolution, Industry 4.0, is driven by the emergence of digital
manufacturing and, most notably, additive manufacturing (AM) technologies. The …
manufacturing and, most notably, additive manufacturing (AM) technologies. The …
A comprehensive study on meltpool depth in laser-based powder bed fusion of Inconel 718
One problematic task in the laser-based powder bed fusion (LB-PBF) process is the
estimation of meltpool depth, which is a function of the process parameters and …
estimation of meltpool depth, which is a function of the process parameters and …
Effect of austenite fraction and stability on strength-hardening-ductility in additively manufactured 17-4 PH stainless steel containing nitrogen
Abstract Additively-manufactured (AM) 17-4 precipitation-hardening (PH) martensitic
stainless steel (SS) built from nitrogen-atomized powder often retains a large volume fraction …
stainless steel (SS) built from nitrogen-atomized powder often retains a large volume fraction …
In situ absorption synchrotron measurements, predictive modeling, microstructural analysis, and scanning probe measurements of laser melted Ti-6Al-4V single tracks …
In this work, the fundamental processing-structure-property (PSP) relationships that govern
laser-based additive manufacturing were investigated with the Ti-6Al-4V alloy. X-ray …
laser-based additive manufacturing were investigated with the Ti-6Al-4V alloy. X-ray …
增材制造工艺及热处理对Ti-6Al-4V 合金组织和性能的影响.
董万鹏， 高华兵， 果春焕， 董涛… - Journal of …, 2022 - search.ebscohost.com
Ti-6Al-4V (TC4) 钛合金是一种使用较为广泛的α+ β 型两相钛合金, 然而, 由于增材制造钛合金
存在微观缺陷, 导致其机械性能低于锻造水平, 通常需要进行后处理. 本文综述增材制造过程中 …
存在微观缺陷, 导致其机械性能低于锻造水平, 通常需要进行后处理. 本文综述增材制造过程中 …
[HTML][HTML] Towards implementation of alloy-specific thermo-fluid modelling for laser powder-bed fusion of Mg alloys
Multi-physics thermo-fluid modeling has been extensively used as an approach to
understand melt pool dynamics and defect formation as well as optimizing the process …
understand melt pool dynamics and defect formation as well as optimizing the process …
Kinetically induced fine secondary α-Ti phase formation in a novel as-cast titanium alloy
The formation of fine secondary hexagonal close packed (HCP) α-Ti precipitates provides
major strengthening in a new Ti-6Al-5Fe-0.05 B-0.05 C (mass fractions in pct) cast alloy. The …
major strengthening in a new Ti-6Al-5Fe-0.05 B-0.05 C (mass fractions in pct) cast alloy. The …
Research progress in CALPHAD assisted metal additive manufacturing
Y Hou, X Li, W Cai, Q Chen, W Gao, D He, X Chen… - China Foundry, 2024 - Springer
Metal additive manufacturing (MAM) technology has experienced rapid development in
recent years. As both equipment and materials progress towards increased maturity and …
recent years. As both equipment and materials progress towards increased maturity and …
[HTML][HTML] Modelling and Numerical Simulation During Selective Laser Melting of Stainless Steel 316L Via Particle by Particle Approach
WI Rasool, ZA Taha - Materials Research, 2024 - SciELO Brasil
Additive manufacturing (AM) technology depends on the implemented selective laser
melting (SLM) process. A good comprehension of its parameters is required to perform an …
melting (SLM) process. A good comprehension of its parameters is required to perform an …