The structural chemistry of Laves phases, especially with respect to their superstructures
induced by coloring and distortions is discussed. Starting from the three classical Laves …

A dense and adhesive oxide coating was in-situ formed on the surface of Ti 56 Zr 44 and (Ti
56 Zr 44) 95 Cr 5 alloys by thermal oxidation treatment in air. The structures and …

The transport sector is an important source of CO 2 emissions worldwide, and a transition
towards hydrogen-fuelled vehicles is a potential remedy. These vehicles require …

High-entropy alloys (HEAs) have a great potential in hydrogen storage applications.
Developing an alloy showing remarkable hydrogen sorption capacity, close to ambient …

This paper reports the partial substitution of Fe, Co, Ni and Cu for Mn in ZrMnCr 0.5 V 0.5
alloy with to obtain ZrMn 0.5 Cr 0.5 V 0.5 M 0.5 (M= Fe, Co, Ni and Cu) high entropy alloys …

The microstructure of ZrFe 2-based alloys were modified by alloying with the Mn, Ti, and V,
aiming to obtain proper hydriding/dehydriding plateau features for the high-pressure …

In this work, we studied the impact of Manganese content on the structural and
electrochemical properties of the AB 2 Laves phase alloys. These multicomponent alloys …

Owing to fast kinetics, high equilibrium pressure and impressive volumetric hydrogen
storage density at ambient temperature, ZrFe 2 based alloys are promising candidates to …

Hydrogen storage in general is an indispensable prerequisite for the introduction of a
hydrogen energy-based infrastructure. In this respect, high-pressure metal hydride (MH) …

Hand-crushed powders are commonly used to investigate hydrogen storage properties.
However, the particle size distribution is not clearly defined, making it challenging to …