Analysis of the thermal-hydraulic effects of a plasma disruption on the DTT TF magnets

R Bonifetto, M De Bastiani, A Di Zenobio… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
The Divertor Tokamak Test (DTT) facility, a fully superconducting nuclear fusion reactor
being built in Italy, will contribute to address the power exhaust problem in EU DEMO …

Description of the AC loss model for the ITER central solenoid during a plasma scenario

P Bauer, M Breschi, L Cavallucci… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
AC loss is a major heat load in the pulsed, superconducting ITER coils, and thus a design
driver for the cryo-system and superconductor. Given the importance of AC loss, extensive …

AC losses in the second module of the ITER central solenoid

M Breschi, L Cavallucci, P Bauer… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
The ITER Central Solenoid (CS) will be realized by assembling a stack of six modules. Each
module is a solenoid consisting of 40 pancakes wound with a Nb 3 Sn Cable in Conduit …

Testing of the ITER central solenoid modules

N Martovetsky, K Freudenberg… - … on Plasma Science, 2022 - ieeexplore.ieee.org
The ITER Central Solenoid is under fabrication by the US ITER organization and its
subcontractors. US ITER will supply seven modules to ITER IO, six of which will be …

Coupling and hysteresis loss measurements on the ITER CS module# 4

M Breschi, L Cavallucci, P Bauer… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
The fourth CS Module (CSM# 4) of the ITER Central Solenoid was tested in
November/December 2022 at the premises of General Atomics, Poway, US. During the …

Multiphysics model of quench for the ITER Central solenoid

L Cavallucci, F Gauthier, M Breschi… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
The ITER Central Solenoid (CS), the backbone of the ITER magnet system, is composed of 6
modules, each made of 40 pancakes, for a total conductor length of about 36 km. More than …

Modeling of quench in the ITER poloidal field coils

L Cavallucci, A Louzguiti, C Hoa… - IEEE Transactions …, 2024 - ieeexplore.ieee.org
The SuperMagnet suite of code is here applied to study the Poloidal Field (PF) and
Correction Coils (CC) and their cryogenic distribution during a quench in the PF coils. In the …

Testing of the ITER CS Module# 4

N Martovetsky, K Freudenberg… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
The ITER Central Solenoid is under fabrication by the US ITER organization and its
subcontractors. US ITER will supply seven modules to ITER IO, six of which will be …

Commissioning and operation of ITER CS module test facility: DC power supply and DC breaker systems

E Ortiz, J Sheeron, K Khumthong… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
Two systems used in factory acceptance power testing of the ITER Central Solenoid Module
(CSM) at General Atomics' Magnet Technologies Center are the Alpha Scientific 50 kA dc …

Design consideration and conductor selection of a low AC loss HTS REBCO magnet carrying high currents at 20 K and 40 K

H Song, Z Jiang, W Song - IEEE Transactions on Applied …, 2023 - ieeexplore.ieee.org
AC loss in high temperature superconductor coils have been frequently studied, however,
mostly for AC power applications at 77 K, rather than specifically for high current but low …