In the today's modern world, the demand of composite material has been increased
gradually. At current scenario aluminium-based composites are commonly used in …

In order to evaluate the model metallic glass alloy's mechanical properties (Fe49. 7 Cr17. 1
Mn1. 9 Mo7. 4 W1. 6 B15. 2 C3. 8 Si2. 4) prepared by spark plasma sintering (SPS) which …

Abstract The machining of SiCp/Al composites is hampered by tool wear monitoring
challenges. SiCp/Al composites are used in industries like aerospace where tool wear can …

Sažetak The paper presents the results of burnishing tests of composites based on AlSi9Mg
aluminum alloy matrix, reinforced with Saffil ceramic fibers and silicon carbide particles. The …

The description of the characteristics of the surface using standardized roughness
parameters can not fully predict its performance properties. One of the tools supporting the …

The manufacturing scenario demands that a material with reduced tool wear be
manufactured in higher surface finish. Grinding is primarily considered to have outstanding …

This experimental study analyses the machinability of two composites namely: 1) Al7075-
10% SiC-0.1% grapheme; 2) Al7075-10% SiC-0.1% CNT by turning process using uncoated …

Machining of metal matrix composite is extreme when analysed with inflexible materials like
steel and aluminium due to the presence of abrasive in the reinforcement which causes …

The research involved the milling of an aluminium-based composite. The reinforcement of
the tested material was Al2O3 fibres. The volume content of the reinforcement in the material …

Machining is one of the important manufacturing processes that changes the shape,
dimensions, surface, and geometry of a workpiece by removing material in the form of chips …