An integrated dc superconducting quantum interference device (SQUID) magnetometer has
been fabricated using a YBa2Cu3O7− x–SrTiO3–YBa2Cu3O7− x multilayer process. The …

In the framework of the Russian R&D Program for superconducting power devices, an
experimental 30 m HTS power cable has been developed. Three 30 m phases with nominal …

Combined twist and tensile loading states are expected in many applications of YBCO
coated conductors. Wire twist is introduced due to winding on complex shapes or for AC loss …

Single layer autonomous high‐T c dc superconducting quantum interference devices
(SQUIDs) have been fabricated and tested. The SQUIDs were designed for application as a …

Digital superconducting quantum interference devices (SQUIDs) have been proposed to
extend the dynamic range of analog SQUIDs whenever magnetic fields varying in a wide …

Nonaqueous Br-ethanol chemical etching was successfully used for the preparation of the
Josephson junctions, vias and crossovers in magnetometers including flux transformers …

The microwave field dependent surface resistance R/sub s/(B/sub hf/) of unpatterned
epitaxial YBa/sub 2/Cu/sub 3/O/sub 7/films was measured at 19 GHz between 4.2 and 80 K …

In superconducting particle accelerators significant changes occur in tune and chromaticity
during the injection of particles and their subsequent acceleration. This behavior is caused …

The TFA-MOD process was applied to fabricate YBCO films on PLD-CeO/sub 2//IBAD-
Gd/sub 2/Zr/sub 2/O/sub 7//Hastelloy substrates. In order to obtain higher Ic performance …

Experimental prototype wires with low AC losses intended for the use in the magnet systems
of the SIS100 and SIS300 synchrotrons of FAIR have been fabricated and investigated. A …