In this experimental study, a flat plate solar collector was constructed and examined for
absorbing and transferring heat from soil to fluid. The light source was an infrared lamp with …

The main target of this study is to evaluate the impact of hybrid reinforcement using Al2O3
nanoparticles and graphite on the epoxy nanocomposites' mechanical and tribological …

The primary objective of the present study is to investigate how alumina nanoparticles with a
low loading fraction by weight affect the physicomechanical and tribological characteristics …

Ultra high molecular weight polyethylene (UHMWPE) is widely used for articulating surfaces
in total hip and knee replacements. In the present work, the tribological properties of …

The current study is on the fabrication of PDC films prepared by slurry spin-coating
technique for photoluminescence activity. At lower spin rates (1000 rpm), thicker and uniform …

Biomaterials are increasingly used for bone tissue regeneration because of their potential to
overcome the morbidity caused by autologous bone grafts and allografts. A combination of …

In this study, an alumina (Al2O3) ceramic coating and a composite coating containing tita-
nium dioxide (TiO2) particles were prepared on surfaces of AA2024 substrates by micro-arc …

In this study, an alumina (Al< sub> 2 O< sub> 3) ceramic coating and a composite coating
containing titanium dioxide (TiO< sub> 2) particles were prepared on surfaces of AA2024 …

Abstract 3D printing pure copper with high electrical conductivity and exceptional density
has long been challenging. While laser-based additive manufacturing technologies suffered …

The primary objective of the present study is to investigate how alumina nanoparticles with a
low loading fraction by weight affect the physicomechanical and tribological characteristics …