The effect of organically modified clay on the morphology, rheology and mechanical
properties of high-density polyethylene (HDPE) and polyamide 6 (PA6) blends (HDPE/PA6 …

Several home made and commercially available polyethylene (PE) samples grafted with
maleic anhydride (MA)(PE-g-MA) were used as compatibilizer precursors (CPs) for the …

Polymer blends and polymer‐based composites are two of the most rapidly developing
groups of materials being of industrial, as well as of academic, interest. More than a decade …

The reactivity of different polyethylene modifiers based on acrylic acid (AA) and maleic
anhydride (MA) with polyamide 6 (PA6) is investigated, using several degrees of …

Low‐density polyethylene (LDPE) was functionalized by melt radical grafting with glycidyl
methacrylate (GMA) and employed for reactive blending with polyamide‐6 (PA6). The effect …

In this study, the effects of polyhedral oligomeric silsesquioxane (POSS) nanoparticles on
the mechanical, morphological and thermal properties of polypropylene-polyamide 6 (PP/PA …

Glycidyl methacrylate (GMA) has been grafted on polypropylene (PP) with the aid of styrene
(St) comonomer, by changing dicumyl peroxide initiator content, GMA level, and St …

A sample of polyamide-6 (PA) was blended with low density polyethylene (LDPE) in the
80/20 wt/wt ratio, either without and with 2phr of an ethylene–acrylic acid copolymer (EAA) …

Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized
using an already investigated method and a sample of Cloisite 15A, a montmorillonite …

When properly compatibilized, the blending of polyethylene (PE) and polyamide (PA) leads
to materials that combine low prices, suitable processability, impact resistance, and …