Silicon (100) substrates are ubiquitous in microfabrication and, accordingly, their surface
characteristics are important. Herein, we report the analysis of Si (100) via X-ray …

Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan
analysis, and the Literature contains both good and bad examples of peak fitting. A common …

On the basis of open-source packages, 3D printing of thin silica gel layers is demonstrated
as proof-of-principle for use in planar chromatography. A slurry doser was designed to …

Atomic layer deposition (ALD) is a technique of choice for a uniform, conformal coating of
substrates of complex geometries, owing to its characteristic self-limiting surface reactions …

In this work, through silicon vias (TSVs) were fabricated using a materials system consisting
of a composite of copper (Cu) and vertically grown carbon nanotubes (CNTs) as a possible …

The universal trends to miniaturization and to automation of technologies affect the further
development of analytical instrumentation and methodologies. In planar chromatography …

This book focuses on a relatively new approach to chemical analysis in general, and to
separation science in particular. It is the first book to systemically cover the theoretical …

We report the XPS characterization of a thin film of Al 2 O 3 (35 nm) deposited via e-beam
evaporation onto silicon (100). The film was characterized with monochromatic Al K α …

Microfabrication of ultrathin-layer chromatography (UTLC) plates via conformal deposition of
silicon nitride by low-pressure chemical vapor deposition onto patterned carbon nanotube …

Office Chromatography combines achievements in office technologies with miniaturized
planar chromatography. In the life sciences, printing of materials became an accepted …