DME-Propane Ignition Delay Time Measurements at Mixing Controlled Compression Ignition Engine-Relevant Conditions

ZP Mohammed, RK Rahman, M Pierro, J Urso, S Vasu - 2023 - sae.org
The blend of dimethyl ether (DME, CH3OCH3) and propane (C3H8) is a potentially
renewable fuel mixture that has the potential to replace diesel in compression ignition …

Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions

M Pierro, JJ Urso, RK Rahman… - … for Gas Turbines …, 2024 - asmedigitalcollection.asme.org
Ignition delay times from undiluted mixtures of natural gas (NG)/H 2/Air and NG/NH 3/Air
were measured using a high-pressure shock tube at the University of Central Florida. The …

Hydrogen and Ammonia Blending With Natural Gas: Ignition Delay Times and Chemical Kinetic Model Validation at Gas Turbine Relevant Conditions

M Pierro, J Urso, RK Rahman… - … Expo: Power for …, 2023 - asmedigitalcollection.asme.org
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were
measured using a high-pressure shock tube at the University of Central Florida. The …

NO and CO Measurements During Combustion of NG/H2/NH3 Mixtures at High Pressure Inside a Shock Tube

M Pierro, B Venger, C Mills, A Marty… - AIAA SCITECH 2025 …, 2025 - arc.aiaa.org
This study will report the time history of laser absorption measurements of CO and NO
during the oxidation of NG/H2/NH3 mixtures using a high-pressure shock tube. Co-fired …

DME-Propane Blends Ignition Experiments and Modeling for Heavy-Duty Mixing Controlled Compression Engines

ZP Mohammed, M Pierro, CW Dennis… - AIAA SCITECH 2025 …, 2025 - arc.aiaa.org
A blend of dimethyl ether (DME) and propane (C3H8) is being studied in a shock tube at
heavy-duty engine conditions at 110 bar. Due to its intrinsic combustion properties …

DME-Propane Autoignition Measurements inside a Shock Tube

ZP Mohammed, J Urso, R Khaleel Rahman… - AIAA SCITECH 2024 …, 2024 - arc.aiaa.org
Dimethyl ether (DME) is a biofuel that has the potential to replace diesel in heavy-duty
engines. A blend of propane (C3H8) and DME could reduce emissions when compared to …

Raman Spectroscopy for Species Concentration Measurements in Rocket Engine Testing Facilities

N Hulliger, ZP Mohammed, J Urso, S Vasu… - AIAA SCITECH 2025 …, 2025 - arc.aiaa.org
With the increasing use of hydrogen (H2) as a fuel source, there is a growing reliance on
accurate H2 monitoring when using this fuel. This study aims to develop a non-intrusive …

Autoignition Delay Time Measurements of Dimethyl Ether at 110 Bar Inside a Shock Tube

AC Guenther, ZP Mohammed, M Pierro… - AIAA SCITECH 2025 …, 2025 - arc.aiaa.org
Fuel mixtures of propane and dimethyl ether have been proposed as potential diesel
substitutes for use in compression-ignition engines. There is an interest in phasing out …

Autoignition Delay Time Measurements for Mixing Controlled Compression Ignition Conditions of Dimethyl Ether and Propane Lean Mixtures

AC Guenther, ZP Mohammed, M Pierro… - AIAA SCITECH 2024 …, 2024 - arc.aiaa.org
Fuel blends of dimethyl ether (DME, CH3OCH3) and propane (C3H8) have the potential to
substitute for diesel fuel in compression-ignition engines. There is a large incentive to phase …

Autoignition Delay Times for Reformate Gas Mixtures From Methane Gas Engines

M Fraze, M Pierro, J Urso, R Rahman, S Vasu… - AIAA SCITECH 2025 …, 2025 - arc.aiaa.org
Blends of Steam Methane Reformate (SMR) autoignition delay times are gathered for use in
developing an onboard device for gas reciprocating engines. Gas reciprocating engines …