In this paper, a new underwater processing technology was proposed, called underwater
wet laser cladding (UWLC). Protective material assisted UWLC was provided to increase the …

In order to investigate the structure of welds, austenitic stainless steel (SS) studs with a
diameter of 6 mm were welded to austenitic SS plates with a thickness of 5 mm using an arc …

Gas metal arc welding (GMAW) is one of the most famous joining methods which uses heat
from the electric arc to melt the tip of the filler metal and the surface of the base materials and …

Welding is a common joining technique for a large number of metals and materials. Today,
there are many types of welding processes in various industries. Friction stir welding is a …

In the present research experiment was performed to study the penetration effect of laser
treatment on Nimonic C263 alloy using 400 W fiber laser. The influence of input parameters …

Purpose: The present article analysed the effect of MAG welding parameters (arc voltage-
AV, wire feeding speed-WFS, and welding speed-WS) on fillet weld leg length (FWLL) in low …

Directed energy deposition is an additive manufacturing process characterised by the
concurrent delivery of material and energy in order to consolidate material into a desirable …

In the present research work, an attempt has been made to study and investigate the
weldability of 1.2-mm-thick Ti6-Al-4V alloy sheet using CW (continuous wave) fiber laser …

Due to high joint efficiency, welding is widely used to join materials. Today, there are many
types of welding procedures in different manufacturing industries. Among welding …

This research conducted a comprehensive second-order full factorial experiment involving
20 experimental samples to investigate the impact of key welding parameters on …