Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powders
SF Moustafa, SA El-Badry, AM Sanad, B Kieback - Wear, 2002 - Elsevier
Copper–graphite composites of graphite contents of 8, 15, and 20wt.% made by powder
metallurgy route using either Cu-coated graphite powders or mixture of copper and graphite …
metallurgy route using either Cu-coated graphite powders or mixture of copper and graphite …
Performance enhancement of carbon/copper composites based on boron doping
The use of carbon/copper (C/Cu) composites as electrical contact materials has developed
rapidly owing to their superior mechanical strength, electrical conductivity, and self-lubricity …
rapidly owing to their superior mechanical strength, electrical conductivity, and self-lubricity …
Graphite fiber/copper composites prepared by spontaneous infiltration
H Wang, Z Tao, X Li, X Yan, Z Liu, Q Guo - Applied Surface Science, 2018 - Elsevier
The major bottleneck in developing graphite fiber reinforced copper (GF/Cu) composites is
the poor wettability of Cu/graphite system. Alloying element of chromium (Cr) is introduced to …
the poor wettability of Cu/graphite system. Alloying element of chromium (Cr) is introduced to …
A case study on the wear mechanism and stress evolution of graphite plugged bronze wear plate from the field trial
J Jiang, S Wan, G Yi, J Wang, J Chang, W Jin… - Engineering Failure …, 2022 - Elsevier
Graphite plugged bronze has been primarily applied as the self-lubricating part in the tough
oilless conditions, and understanding the detailed wear characteristics and the contacting …
oilless conditions, and understanding the detailed wear characteristics and the contacting …
A mini-review of three-dimensional network topological structure nanocomposites: Preparation and mechanical properties
Y Liu, J Huang, F Zhou, L Ni, Y Shen, W Liu… - Nanotechnology …, 2021 - degruyter.com
Abstract Three-dimensional (3D) network topological structure composite (3D-NTSC) is a
new type of composite in which both the matrix phase and the reinforced phase have 3D …
new type of composite in which both the matrix phase and the reinforced phase have 3D …
Influence of metal-coated graphite powders on microstructure and properties of the bronze-matrix/graphite composites
J Zhao, P Li, Q Tang, Y Zhang, J He, K He - Journal of Materials …, 2017 - Springer
In this study, the bronze-matrix/x-graphite (x= 0, 1, 3 and 5%) composites were fabricated by
powder metallurgy route by using Cu-coated graphite, Ni-coated graphite and pure graphite …
powder metallurgy route by using Cu-coated graphite, Ni-coated graphite and pure graphite …
Effect of substrate bias on the tribological behavior of ta-C coating prepared by filtered cathodic vacuum arc
Tetrahedral amorphous carbon (ta-C) films were coated on the tungsten carbide cobalt by
using filter cathodic vacuum arc (FCVA). All the specimens were coated at different bias …
using filter cathodic vacuum arc (FCVA). All the specimens were coated at different bias …
Optimization of electroless copper coating parameters on graphite particles using Taguchi and grey relational analysis
YP Deepthi, M Krishna - Materials Today: Proceedings, 2018 - Elsevier
Electroless process is employed to get uniform coating of copper on graphite particles.
Electroless coating process was performed based on Taguchi L16 orthogonal array. Optimal …
Electroless coating process was performed based on Taguchi L16 orthogonal array. Optimal …
泡沫镍/环氧树脂/碳化硅双连续复合材料的料浆冲蚀行为研究
姜胜利， 侯思焓， 刘洋， 段德莉， 李曙 - 摩擦学学报, 2017 - tribology.com.cn
设计并制备出一种颗粒增强型双连续三元复合材料--泡沫镍/环氧树脂/碳化硅双连续复合材料,
以材料的总损失量为重点研究了其在含氯化钠料浆冲蚀条件下的损伤行为. 结果表明 …
以材料的总损失量为重点研究了其在含氯化钠料浆冲蚀条件下的损伤行为. 结果表明 …